How can i read this MCU?

**AutoElectronicaFS** · 2nd April, 2015, 04:30 AM

Hi friends, what programmer i need to use to read this MCU?

Memory device is Motorola 9S08DZ32 32-pin SMD package.

**marinero123** · 2nd April, 2015, 06:35 AM

TMPRO
Software module 194 - Fiat South America immobox Marelli IMM009.10
Memory device is Motorola 9S08DZ32 32-pin SMD package.
You can read Motorola with TMPro.
Use Megamos Crypto or Silca T6 - JMA TP08 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Fiat: Fiorino Furgao,Palio 2012->,Siena 2012->,Ducato 2012->
Peugeot:Boxer 2012->
Citroen:Jumper 2012->

**tech_cz** · 2nd April, 2015, 12:20 PM

For example Pemicro:
USB Multilink with PROGHCS08 software or CyclonePro (software included).

WBR, Marek

**gepakg** · 2nd April, 2015, 12:27 PM

if you have tmpro best is through them,if you didnt have upa-s can be also available for reading

regards Gepa

Originally Posted by AutoElectronica**

Hi friends, what programmer i need to use to read this MCU?

Memory device is Motorola 9S08DZ32 32-pin SMD package.

**AutoElectronicaFS** · 2nd April, 2015, 01:07 PM

Originally Posted by gepakg

if you have tmpro best is through them,if you didnt have upa-s can be also available for reading

regards Gepa

What is upa-s?, i have upa 1.2 and upa 1.3, xprog and carprog.

Thanks!

**vlado kljucar** · 2nd April, 2015, 01:10 PM

upa s is original upa my friend, new black box

**simaservis1108** · 2nd April, 2015, 01:10 PM

UPA Genuine reads these boxes if MCU is not secured.
If it is secured,you need SS to read it,some members here know it.

stalonerambo · 2nd April, 2015, 01:54 PM

hi man, how about conections do you have? how about chinese devices for read it , do you know?

**gepakg** · 2nd April, 2015, 01:57 PM

i dont know but this picture is genuine from TmPro2 and his external wires for reading some mcu`s,etc.

UPAS-S possible to read this mcu and i can give explain connections

red point is Vdd or 9 pin from UPA

blue ppoint is GND or 5 pin from UPA

white point is BDM or 6 pin from UPA

orange point is RESET or 7 pin from UPA

regards Gepa

BTW.this mcu in this boxes are not secured and UPA dont have possibilities to enter SS,this kind of mcu think that only bdm maybe locked

Originally Posted by gepakg

if you have tmpro best is through them,if you didnt have upa-s can be also available for reading

regards Gepa