Kess V2 Harware Rework - FREE SOLUTION!

**boxsport** · 22nd January, 2020, 04:15 PM

Originally Posted by elmer9

I don't have ktag ... I only have kess rework .. but looking at the ktag pictures there are other compotents that can be replaced ... if you send a high resolution photo of ktag I make the new list

hello there.
after some time i was able to take pictures of my Ktag.
I will send you PM with link, and if you can help me out by pointing what do i need to change and the components codes, i would be very grateful...
Thanks

PS: Since this is a Kess Rework Thread, i dont think i should post pictures here.... but if its OK, i can share them here.

Cheers

**adios15** · 27th January, 2020, 06:30 AM

Originally Posted by elmer9

Attachment 677917

change celestial highlighted components

what components should I put in order for 24v to work?

**vDiv** · 27th January, 2020, 11:48 AM

////delete

**Hexer84** · 28th January, 2020, 11:45 AM

Does somebody know which led pipe is exactly needed like the original?

You can see it in attachment.

Looks like something like that: https://www.mouser.de/ProductDetail/651-2202315

Gesendet von meinem SNE-LX1 mit Tapatalk

**Hexer84** · 30th January, 2020, 10:50 PM

Originally Posted by elmer9

nobody said that the current clones are not good,
but they are simply not stable and on some control units the risk is high not to mention the famous "wake-up error" which after reworking tends to no longer occur

Hi elmer9,

Your private message inbox is full.

Tried to send you a message again.

Gesendet von meinem SNE-LX1 mit Tapatalk

**Hexer84** · 1st February, 2020, 09:17 AM

Originally Posted by Hexer84

Does somebody know which led pipe is exactly needed like the original?

You can see it in attachment.

Looks like something like that: https://www.mouser.de/ProductDetail/651-2202315

Gesendet von meinem SNE-LX1 mit Tapatalk

Actually I am pretty sure that it is the right led pipe.

Does somebody know which smd led needs to buy?

Green and red one.what voltage they have.

Gesendet von meinem SNE-LX1 mit Tapatalk

**tango** · 1st February, 2020, 02:34 PM

easier to just test the voltage of the ones you have installed in your hardware

**grubisicjosip** · 2nd February, 2020, 09:22 PM

Hi can you help to me i cannot read Flash form edc16 with ktag on bench. I give message that no connection edc. Thanks in advance

Poslano sa mog SLA-L22 koristeći Tapatalk

**A3fDevil666** · 2nd February, 2020, 09:53 PM

Connection over bdm port ?

**Hexer84** · 2nd February, 2020, 10:22 PM

Originally Posted by grubisicjosip

Hi can you help to me i cannot read Flash form edc16 with ktag on bench. I give message that no connection edc. Thanks in advance

Poslano sa mog SLA-L22 koristeći Tapatalk

Open it and read with ktag!

Which car?

Which edc16?

Gesendet von meinem SNE-LX1 mit Tapatalk

**grubisicjosip** · 2nd February, 2020, 10:44 PM

Hi i try to read edc 16c39 from Iveco daily but i try to read edc 15 from vw and i cannot. Do you have idea.thanks

Poslano sa mog SLA-L22 koristeći Tapatalk

**elmer9** · 3rd February, 2020, 09:13 AM

guys I carried on my research I found both the LEDs and the light tube
kess-rework.rar

**Hexer84** · 3rd February, 2020, 10:16 AM

Originally Posted by elmer9

guys I carried on my research I found both the LEDs and the light tube
kess-rework.rar

Hi Elmer,

Can you please send me the password for the file?

Your private message inbox is full.

Greetings

Gesendet von meinem SNE-LX1 mit Tapatalk

**elmer9** · 3rd February, 2020, 03:38 PM

Originally Posted by Hexer84

Hi Elmer,

Can you please send me the password for the file?

Your private message inbox is full.

Greetings

Gesendet von meinem SNE-LX1 mit Tapatalk

I'm sorry I tried to answer but you have full mail