Kess V2 Harware Rework - FREE SOLUTION!

[yoni13]

The price is good. I also have one for sale for 180 Euro. Sophisticated and tested on several cars. I wouldn't be scared.

Hi, I already received your Kess V2 Reworked, K-Suite installed, tested and everything works fine. Thank you very much for this unit! Rep+++

[punisher1199]

Deleted post

[tkmmazda]

Hi,
3D stickers available again. Sticker "Alientech" and "K"
Post # 1524

[tkmmazda]

Hi,
3D stickers available again. Sticker "Alientech" and "K"
Post # 1524
1pc Kess v2 reworked ready for work and for sale.

[kenancatli]

hello
I have soldered Crystal very smal 3.2mm lenghte it good?
CSTCE8M00G15L99R0 orginal 7.2 mm lenghte


Regards

[boxsport]

hello
I have soldered Crystal very smal 3.2mm lenghte it good?
CSTCE8M00G15L99R0 orginal 7.2 mm lenghte


Regards

it seems to be all good.
Nice job.

[saoron2002]

To everybody that still has not managed to repair the K-line, I post my final transistor configuration that works perfectly, with transistor numbers included. If this helped someone click thanks

[kenancatli]

Hello
Kess v2 5017 red pcb online version
Reworked
Mercedes sprinter w906
Delphi crd3.20 Id read ok
Reading file : error while transferring data in reading. Not success
I have done software 2.47 and 2.53 not success, what it problem?

Iaw 4af all ok
Edc15p all ok
Edc16c39 all ok

Regards

[kenancatli]

I try also ktag not success
I find no on ktag crd 3.20 .
I try under delphi crd3.40
Not success

Help please

[Jupiter199]

I try also ktag not success
I find no on ktag crd 3.20 .
I try under delphi crd3.40
Not success

Help please

Send me please "All LOG" from you KESS.

[siemon]

did any one have new software

[PelsonBMW]

Hey ! i try to read Siemens MS41 with Kess and no success , i have error " ERROR WHILE TRANSFERRING DATA IN READING" and even on bench connected ECU i have the same error :/ what should i do ? , this topic has so many sites i couldnt find anything

[jgdf]

buenas tardes kess v 2.6 clon c puede actualizar a una versión más nueva si tiene la versión actualizada ayúdeme

[Zund]

Hi Guys,
i am currently toying with the idea to buy a Kess V2 EU Clone.

The Seller put this PCB in his auction:
https://ae01.alicdn.com/kf/HTB12OiLb...663524ff40ca71

and this Specs:
1.the left upper corner and the lower right corner notch size is not the same
2.Extra buzzer
3.WFs = Infineon, BCR112 NPN Digital Transistor
4.27E = ON Semiconductor NUP2105LT1G
5.6DW = NXP BC817,215 NPN Bipolar Transistor
6.A6c =MMUN2113LT1G / MMUN2113LT3G
7.K5B = BC807-25-7-F PNP Bipolar Transistor
8.Using imported Japanese Murata filter NFE61PT472C1H9L

should i give it a try or search for another one?

Greetings

[boxsport]

Hi Guys,
i am currently toying with the idea to buy a Kess V2 EU Clone.

The Seller put this PCB in his auction:
https://ae01.alicdn.com/kf/HTB12OiLb...663524ff40ca71

and this Specs:
1.the left upper corner and the lower right corner notch size is not the same
2.Extra buzzer
3.WFs = Infineon, BCR112 NPN Digital Transistor
4.27E = ON Semiconductor NUP2105LT1G
5.6DW = NXP BC817,215 NPN Bipolar Transistor
6.A6c =MMUN2113LT1G / MMUN2113LT3G
7.K5B = BC807-25-7-F PNP Bipolar Transistor
8.Using imported Japanese Murata filter NFE61PT472C1H9L

should i give it a try or search for another one?

Greetings

Even if the board you get, comes with those components, you should ALLWAYS do the Rework to be sure the main components are OK...
Otherwise it will be a flip coin if it works good or not...
The one i bought came and it worked OK even when i didnt made the rework on it. and it seems to have the Originla components they claim...
But at the end i replaced them all just to be sure...