Kess V2 Harware Rework - FREE SOLUTION!

[Jupiter199]

hi all
can somebody upload sd card files for ktag 2.13?

ktag 2.13 - maybe wrong classification of version KTAG. 5.001, 6.070, 7.020 - version.
2.13 - version KSUITE.

[Lolo4321]

For EDC 15, i have a question about checksum. We can easily get our hands on clone hardware, but many of them don't correct checksum for EDC 15. I now for WinOLS, and EDC Titanium but... they cost about 1000 USD. My question is what software u use for this? Is there something available but cheaper ?

[gas43]

For EDC 15, i have a question about checksum. We can easily get our hands on clone hardware, but many of them don't correct checksum for EDC 15. I now for WinOLS, and EDC Titanium but... they cost about 1000 USD. My question is what software u use for this? Is there something available but cheaper ?

I think a good reworked kess (with good micro sd), has no problem to correct checksums...

[Lolo4321]

I'm still in debate between MMPS v13 (the metal caseback), galetto and kess v2 + rework. As i heard MMPS v13 doesn't need any rework, works ok. I just need it for my friends cars EDC15, and EDC16+/EDC16C32

I had problems finding the listed parts on the mentioned site for kess rework.
What is the cheapest original ecu tuning solution?

[kospoz]

Take the galetto 1260 and you will be fine

[elmer9]

for edc15 best is mpps which has the ability to resume after a badly written write

[Lolo4321]

Can the smps mmps v13 run on windows 10? I dont want to run virtual machines and dual boot.
Can smps mmps do a mk6 golf tdi ?
Can i aqire checksum program for free? With kess v2 i would get it on a disc...
Yeah if i knew they were yes i would to for smps mpps bcs of no hustle to rework.

Edit: i have ordered kess v2, i can always re-sell it if i dont need it.

Edit:
Can someone confirm that this is the part list needed for kess v2 red pcb rework?
Transistors to use :
---------------------
5x BCR112 sot23 farnell code: 8737258 must buy 5+
rscomponents: 287-667 packs of 10
4x MMUN2113 / PDTA144ET sot23 farnell code: 8736987 must buy 5+
rscomponents: 690-0133 packs of 25
3x BC817 sot23 farnell code: 1081223 must buy 5+
rscomponents: 216-9410 packs of 20
2x BC807 sot23 farnell code: 1081222 must buy 5+
rscomponents: 216-9404 packs of 20
5x NUP2105LT1G / PESD2CAN sot23 farnell code: 1510712 must buy 5+
rscomponents: 464-255 packs of 20

Murata filters:
----------------
6x NFE61PT472C1H9L (connect ground for all of them) farnell code: 9528229 must buy 5+
rs components: 188-8772 pack of 20

2*1uF - 35V case size C farnell code: 1457460
2*220uF - 10V case size D farnell code: 1793889
9*10uF - 16V tantalum case size C farnell code: 1457464

[boxsport]

Can the smps mmps v13 run on windows 10? I dont want to run virtual machines and dual boot.
Can smps mmps do a mk6 golf tdi ?
Can i aqire checksum program for free? With kess v2 i would get it on a disc...
Yeah if i knew they were yes i would to for smps mpps bcs of no hustle to rework.

Edit: i have ordered kess v2, i can always re-sell it if i dont need it.

Edit:
Can someone confirm that this is the part list needed for kess v2 red pcb rework?
Transistors to use :
---------------------
5x BCR112 sot23 farnell code: 8737258 must buy 5+
rscomponents: 287-667 packs of 10
4x MMUN2113 / PDTA144ET sot23 farnell code: 8736987 must buy 5+
rscomponents: 690-0133 packs of 25
3x BC817 sot23 farnell code: 1081223 must buy 5+
rscomponents: 216-9410 packs of 20
2x BC807 sot23 farnell code: 1081222 must buy 5+
rscomponents: 216-9404 packs of 20
5x NUP2105LT1G / PESD2CAN sot23 farnell code: 1510712 must buy 5+
rscomponents: 464-255 packs of 20

Murata filters:
----------------
6x NFE61PT472C1H9L (connect ground for all of them) farnell code: 9528229 must buy 5+
rs components: 188-8772 pack of 20

2*1uF - 35V case size C farnell code: 1457460
2*220uF - 10V case size D farnell code: 1793889
9*10uF - 16V tantalum case size C farnell code: 1457464

I made the rework on my Kess using these components:

Item#	Comp.Code	Quantity	Brand
1	CSTCE8M00G15L99R0	1	muRata
2	MUN2113T1G	4	ON Semiconductor
3	BCR112E6327	5	Infineon Technologies
4	BC817W115	3	Nexperia
5	BC807-25W	1	Nexperia
6	LM1117MPX3.3NOPB	1	Texas Instrument
7	PZT2907AT1G	1	ON Semiconductor
8	NFE61PT472C1H9L	6	muRata
9	TRJB106K020R1000	8	AVX
10	SK14-TP	6	MCC
11	USBLC6-4SC6	4	STMicroelectronics
12	TPSD227K010R0150	2	AVX
13	TPSB105K035R2000	2	AVX
14	EEE-FK1H221P	1	Panasonic
15	LM2575S-5.0/NOPB	1	Texas Instrument
16	MSS1260-224KLD	1	Coilcraft
17	PKM17EPPH4001-B0	1	muRata
18	L9613B-TR	1	STMicroelectronics
19	NUP2105LT1G	3	ON Semiconductor

In mouser.com you can get them individually.
In my case i had to buy from 2 different suppliers, because mouser didn't had some of them at the time.
hope this helps you.
Cheers

[miguelang611]

Hi!
I have been reading out and I am still lost.
Which is the best PCB currently available in China (<80€)?
Still so much rework needed?
Thank u!

[gas43]

Hi!
I have been reading out and I am still lost.
Which is the best PCB currently available in China (<80€)?
Still so much rework needed?
Thank u!

I think it is all the same...
Of course it need rework and a good micro sd card.

[Lolo4321]

Yeah its all the same, pretty much discussed many times on this topic.
Red pcb ok for rework.
Purple real EU clone works out of the box.
( Yeah red one will work out of the box, but can u trust it, and how its stable bcs of cheap components...)

[miguelang611]

Hi there!
I found this on AliExpress, which looks to be a reworked Kess v2, the components look to match... Board is different, with other cuts...
https://s.click.aliexpress.com/e/K1PdXAEchat do u think?

[Lolo4321]

Hi there!
I found this on AliExpress, which looks to be a reworked Kess v2, the components look to match... Board is different, with other cuts...
https://s.click.aliexpress.com/e/K1PdXAEchat do u think?

Link not working

[miguelang611]

Link not working

Sorry, here u have
https://m.aliexpress.com/item/32910275627.html
I marked what I think it is different to most chinesse clones
This one :
4Uc9SmS.jpg

vs

Others:
20190903_215912.jpg

I just bought it, cause well, in the worst scenario, is the same "bad" clone. Although I hope it is as the photo with better components.
Thanks and regards!

[Lolo4321]

Just compare the list of parts that need to be re-worked vs current parts... + Again the quality of the microSD card