Kess V2 Harware Rework - FREE SOLUTION!

[heteromies]

Do you know anyone who sells the reworked version.
I am considering buying one.
Thanks

Sent from my SM-G930F using Tapatalk

And if need 5.028 version info, PM.

[Jerak]

I think you will receive the same one, that i have received. My PCB has manufacturing date 01.04.2018 the "reworked" one with different Corners has Manufacturing date 01.04.2017. Nevertheless i am very interessted to see the Pictures of your pcb.

So the ad said:
- The left upper corner and the lower right corner notch size is not the same
- WF = Infineon, BCR112 NPN Digital Transistor
- 27E = ON Semiconductor NUP2105LT1G
- 6DW = NXP BC817,215 NPN Bipolar Transistor
- A6c =MMUN2113LT1G / MMUN2113LT3G
- K5B = BC807-25-7-F PNP Bipolar Transistor
- Using imported Japanese Murata filter NFE61PT472C1H9L

I didn't get the PCB with the different corners but it is dated 2017.4.1.

The components are WF, 27E, 6DW, A6c and K5B but I don't know if these are the actual ones stated in the ad.
Anyone know if this is legit?

[tdifreak]

all china tools need to be reworked!

Yes, throw them to the bin and buy legit tools! Who's going to develop them, the chinese? (no smilies here)

[Hexer84]

Reworked Clones or EU Clones are working good.

Yes I know, you can't do the very newest cars. But you can read many many many cars via obd or with ktag on bench.

Make money, save money and buy good original hardware.

That's a good way and it works.

Gesendet von meinem SNE-LX1 mit Tapatalk

[gc92pt]

Used kess v2 clone to remap 4 cars , so far no problems

[Gary Diaz]

Hola James me podrias pasar la contraseña y clave, gracias

[clockworkfart]

You know when you've been going round and round in circles and you're not getting anywhere..... and your brain just seems to decide it's done for the day? That's how I feel at the moment; apologies if this is in the wrong place, you guys sound like you know enough to help;


I'm not 100% sure what I have but it was sold as eu version with 5.017fw and red board but it's a green board and 4.036fw. It does have the no token magic but can't be connected to the internet. I did notice the cap (?) inside is rated at 25v not the usual 50v if that helps at all.

I was using it happily enough as it was but I bought a Ktag that came with ksuite 2.23 that's apparently net safe and token free so I've been trying to get that to work so I won't need to worry about the internet with either. The Ktag works fine but kess says EEFFACE error or something like that.

It seems to me that I need to update the firmware but other than that I'm none the wiser really and, like I said, my iq's gone down a fair bit since this morning

Can anyone point me in the right direction please?

[eljisu]

someone can give their opinion, I have changed components, I have bought good quality, can someone say their opinion about my work?

[pocinas]

does anyone know why this dongle is?

[joker01]

guys I wanted to rework my green kb pcb ...... this list on the front page of the post is ok or are there other components to change ????
thank you

Transistors to use :
BCR112
MMUN2113
BC817

Murata filters:
NFE61PT472C1H9L (connect ground for all of them)

Capacitors:
1uF - 35V
220uF - 10V
10uF - 16V tantalum

[pocinas]

guys I wanted to rework my green kb pcb ...... this list on the front page of the post is ok or are there other components to change ????
thank you

Transistors to use :
BCR112
MMUN2113
BC817

Murata filters:
NFE61PT472C1H9L (connect ground for all of them)

Connect MIDDLE PINS MURATTA FILTERS TO GROUND, not the signal

Capacitors:

1uF - 35V
220uF - 10V
10uF - 16V tantalum

Go Follow Picture.

I changed Voltage Stabilizators as well
1 x LM1117 3.3v
1 x PZT2907AT1G
1 x LM2575s 5.0V
all diodes SK14 (not required)
Micro SD Card to better quality if is NO NAME (BLANK on the top) but very carefull, is not easy just copy CONTENT, need generate againb becase another card have diffrent CID so will doesn`t work, if you copy 1:1

[Hexer84]

does anyone know why this dongle is?

I would like to know this too.


Gesendet von meinem SNE-LX1 mit Tapatalk

[elmer9]

boys but the original LEDs where they are ordered? led.jpg
tranks

[joker01]

info guys ..... I tried to search fw kess 5.017 for nxp but I didn't find anything ..... could anyone share ????thank you,.....

[Hexer84]

boys but the original LEDs where they are ordered? led.jpg
tranks

Look at this. You need and smd led to get this working.

https://m.reichelt.de/lichtleiter-sm...cEALw_wcB&&r=1

Gesendet von meinem SNE-LX1 mit Tapatalk