ASCM (5th June, 2020)
ASCM (5th June, 2020)
Ok, so i bought a Reworked Kess V2 and just have i few questions.
-Is it K-suite i should install to Read & Write files via OBD2 ?
-do you know any good Filesservice database that have good prices and good files ?
kess v2 helpI have a kess v2 master version clone green board any good updates on SD card? i cant access K tag. Any other help would be appreciated, Thanks.
boxsport (14th July, 2020)
if you want to do the SD card using a better one, check this thread:
https://www.digital-kaos.co.uk/forum...-a-new-SD-card
if what you want is some kess firmware updates, then it will depend on the version you have and the $$$ you can spend...
Just Consider helping Freely like I want to do...
Thanks and Rep are Always Welcome...
My Kess is 3.099
boxsport (15th July, 2020)
I think you can buy kess upgrade kit (nxp + sd card) so that you can upgrade to firmware 5.017.
Not sure if you need to do any rework on your pcb, but probably some more experienced users can help you out with these doubts...
You can find upgrade kit in AliExpress or probably someone here can sell with good quality SD card
Just Consider helping Freely like I want to do...
Thanks and Rep are Always Welcome...
seat1234 (15th July, 2020)
I'm willing to pay for a good quality SD card for my kess V2 master ultimate token version FW 3.099 and M board
It seems all links have disappeared by now, so i hope someone can post the following:
4.024 bin + hex + sd-card + KessV2 sw that goes with 4.024.
Hi every one,
maybe someone can help me? I bought a kess V2 5.017 clone from china. Worked good. one day i get on my Touareg EDC16CP14 Wake up error. After that i made the rework and also tried the solution with new good sd-card. But the issue is the same.
Speed minimum and Pull up resistance in options i tested.
tested on Mercedes A class with no problem.
tested on Golf 4 1.9tdi not work
post deleted
Last edited by mrjay88; 16th August, 2020 at 11:43 PM.
how to view picture on this forum
[QUOTE=nojmi7;3245376]Hi guys, I bought kess v2 5.017 and ktag 7.020 red pcb, I have mixed thoughts about the operation of these devices, must rework?
Can anyone tell me wich parts needs to be replaced to rework this pcb ?
boxsport (3rd September, 2020)
Bookmarks