golf6 lost keys.

**pouleddy** · 2nd May, 2015, 07:01 AM

Hi, i need info about golf 6 2011,this car he don't have a working key,the costumer lost the remote key,and now he order from dealer new remote key by vin number, please if any one can give me info can i direct adapt it to the nec dash or i must dismount the dash and put the eeprom in service mode?,i have avdi original. thank you....

**totalkey** · 2nd May, 2015, 07:09 AM

Did you Try entering service by obd?

**pouleddy** · 2nd May, 2015, 07:23 AM

Originally Posted by totalkey

Did you Try entering service by obd?

no the car is far from me, but i just asking before arrive to the car if can done without dismount or must dismount with new key ordered from by vin.

**key point** · 2nd May, 2015, 07:53 AM

You have to take dash out and eeprom to enter service mode. You also will need to check your dealer supplied key, the 1D48 will be locked and require replacing.

**autochei** · 2nd May, 2015, 08:30 AM

if ur customer order key from dealear key it s ready to start no need make nothing

**autofan1965** · 2nd May, 2015, 09:11 AM

Key for VW from dealer is ready for start? At my knowledge it is precoded and oonly think wich you need to make is add key id from it to immodata.

**pouleddy** · 2nd May, 2015, 09:39 AM

ok,now i am going to try after come back to give the result.

**doctordiag** · 2nd May, 2015, 10:28 AM

yes need to make add key id from it to immodata.

**autochei** · 2nd May, 2015, 10:52 AM

only for uds it s ready to start

**autofan1965** · 2nd May, 2015, 11:06 AM

You mean when i receive dealer key then i dont need add it to immo? I put it in ignition and it will work?

**autochei** · 2nd May, 2015, 11:30 AM

repeat.. only for uds

**autofan1965** · 2nd May, 2015, 12:42 PM

yes for uds. But how it should look? I take key from dealer and i need program only remote? Have you tryed itself? Because from data wich i own it seems at least strange.

**pouleddy** · 2nd May, 2015, 12:52 PM

Friends,i connect my avdi and it show me (make sure you give ignition on with working key) so i dismount the dash and enter service mode the eeprom & re solder back eeprom,after i enter by obd2 service mode, here i rewrite the original eeprom back by obd2 it done,after i add the dealer remote key using tagkeytool ring and after update,so after i use reset bottom to resolve the km cause it show me error,after i use it reset it solve,but when i use leave service mode by obd2, it show me must enter service mode by obd2,so i retry to use enter service mode by obd2,but here i give me massage make sure you give ignition with working key,so where is my mistake here,please did any one can help me?
ps.the car is key-lees go

**autofan1965** · 2nd May, 2015, 01:39 PM

When you add key id correct place key near start button should turn ignition on. I think you will unable to do fully working keylessgo with avdi.

**pouleddy** · 2nd May, 2015, 02:24 PM

Originally Posted by autofan1965

When you add key id correct place key near start button should turn ignition on. I think you will unable to do fully working keylessgo with avdi.

let me say i do it on the bench i have system for this, cause the car far from me,for that i ask in dk it can done by obd2 if i use by vin dealer key? or must dismount the dash?,so here i learn by avdi can't done without a working key.like say to me (key point) in post 4# (You have to take dash out and eeprom to enter service mode).
it solved,it was my mistake, cause must in first step after add new key and update, we must re use enter service mode by obd2 before using any bottom, and after that i can use the reset bottom to solve the km which show me error,and after that we can use leave or enter service mode. thanks for all...