obeids (5th October, 2017), sniegavirs (4th October, 2017), strikeforce2 (16th February, 2019)
VVDI2 is very limited in remote production but works with Chinese regional remotes. I don't understand the need for different remotes for different regions. I have a VVDI Key Tool bought here in South Africa but remotes I import from China don't work on it. I think that's why Keydiy will remain the front runner in the Remote supply business as you buy their remotes and they work in any region. By trying to protect their distributors they actually limit their sales as there are other tools that do the same job with a better selection of remotes without regional restrictions. I am a big fan of Xhorse products and also have VVDI2, VVDI MB as well as VVDI Prog so just pointing out where I think their failing their customers.
Last edited by Carkeysa; 4th October, 2017 at 07:55 AM. Reason: Put on the wrong group but still relevant here.
obeids (5th October, 2017), sniegavirs (4th October, 2017), strikeforce2 (16th February, 2019)
1-sonata 2005 2006 failed to read .
I reflashed my cable to ver 3 but can't connect to mcu ,when I put 12 v power to ecu as shown in the document pc can't connect to vvdi prog. when I remove 12 v, pc connect but can't read .
2- Bosch me 744 can't read .
is there something wrong with the cable ?
Sent from my SM-A520F using Tapatalk
Actions speak louder than words
mg7.9.8 can't read.
I checked wiring twice
Sent from my SM-A520F using Tapatalk
Actions speak louder than words
Its just my pc not loading mega.co.za ?
Tried to download vvdi 4.6.0 6.1 throwing error. On.all downloads
What external power supply or adapter is used to power up vvdi when read bmw f series engine ecus?
Because the internal regulators of the ECU require 12 volts of power at least 1 amperes to stabilize the voltage in the circuit
I surprise those who do not want to use the Thanks and Reputation buttons but ask for the password of the files.
csavargo2 (20th March, 2018)
No need to use 12v 1-2 amp adapter . Or bench power supply 12v to vvdi. Correct?
ECU power supply from VVDI not directly
and
vvdi need to external power
I surprise those who do not want to use the Thanks and Reputation buttons but ask for the password of the files.
drugowaz (10th October, 2017)
i know that. im asking what suply to use to vvdi tool port . 12v 1-2 amp?
12V 1-2 amp is OK,no problem.
drugowaz (10th October, 2017)
Can't read with vvdi prog cas3+ 0L15Y after update to 9395656, prog trying up to 98% and stop with error.
Check your connections if needed try resolder the wires.
Bookmarks