VVDI PROG

[trinicolin]

can someone help me? to read tricore with vvdi prog? in suzuki swift sx4
please, thnks

Sent from my Redmi 4X using Tapatalk

Ktag.

Sent from my SM-G930F using Tapatalk

[rob h]

https://www.digital-kaos.co.uk/forum...cu-info-needed

Same as Swift, not all have Keys stored in ECU.

[BradyAus]

Somebody used fvdi to read older ezs from W208, W210 etc? xhorse doesnt produce adapters fro this ezs, but mcu cable could do this two Motorola MC68HC05X32 witfout desoldering, or only lifting reset leg?

Desolder and read on XDPG14CH MC68HC05X32 (QEP64) adapter. Or try read without desolder if you have this set? https://www.autodijagnostika.biz/pro...-set-mercedes/

[WinWoj]

Desolder and read on XDPG14CH MC68HC05X32 (QEP64) adapter. Or try read without desolder if you have this set? https://www.autodijagnostika.biz/pro...-set-mercedes/

I know both solution. Thought somebody know more

[trinicolin]

Thank you very much for your interest colleagues

Did you try reading with cable?

Sent from my SM-G930F using Tapatalk

[emtec3]

at me it turned out only force unlock

[emtec3]

Hello. Soft 4.8.0 BMW CAS4 1N35H chip not read and write after unlock success, force unclock too:
[2019-03-01 08:50:53] : Start communication...
[2019-03-01 08:50:53] : Chip is not crypt FE
[2019-03-01 08:50:53] : End communication...
[2019-03-01 08:50:53] : Operation success
[2019-03-01 08:50:56] : Check Device...
[2019-03-01 08:50:58] : 12V Power Adaptor connected
[2019-03-01 08:50:58] : Initialization device...
[2019-03-01 08:50:58] : Initialization success!
[2019-03-01 08:50:59] : Initialization chip...
[2019-03-01 08:50:59] : ID 0N35H 0XCC95/1N35H 0XCC95
[2019-03-01 08:51:00] : Chip is crypt,this operation needs to decrypt

Any ideas?

at me it turned out only force unlock , but loss of data is possible!!!

[McDowell]

Hello mate,

I tried to Erase with Erase INC button and i get an error, any ideas?

Thanks so much

Captura.JPG

[bero]

-deleted--------

[bero]

Ktag.

Sent from my SM-G930F using Tapatalk

There is a function to read, but no wire diagram..
Asked same on page 194 for EDC17CP20 but still no answer.
My ktag broke

[unu]

please ignore this message ... it's double posted ...
can be deleted ?

[unu]

did you plan to add TMS470 family onto this programmer ?

VVDI PROG latest software version V4.7.9 update

-------------------------------------
v4.7.9 (2018-1-27)
* This version DON't need update firmware
+ Add VVDI PROG USER MUNUAL 4.7.9 version in Doc folder
+ Add MBM29F400TC/BC-PF, MBM29F400TC/BC-PFTR, MBM29F400TC/BC-PFTN, MBM29F200TC/BC-PFTN, MBM29F200TC/BC-PFTR,
MBM29F200TC/BC-PF, MBM29F800TA/BA-PFTR, MBM29F800TA/BA-PFTN, MBM29F800TA/BA-PF options in <1-EEPROM&FLASH>-><FUJITSU>
+ Add TC1793-CAN options in <2-MCU>-><INFINEON-TRICORE>
+ Add R5F64525JFD, R5F64525LFD, R5F64525KFD, R5F6452NJFD, R5F6452NLFD, R5F6452NKFD options in <2-MCU>-><RENESAS-R32C>
+ Add SPC5607B options in <2-MCU>-><ST-SPC560XXXX>
+ Add RATTAN-ZS options in <5-DASHBOARD>-><SAICMOTOR>
+ Add HYOSOW-S2-COMPUTER options in <8-OTHER>-><BAIC>
+ Add HYOSOW-S2-CCM options in <8-OTHER>-><BAIC>
+ Add A6L-C7-SUNROOF-MOTOR options in <8-OTHER>-><AUDI>

Notes: please keep using the latest software version, any problem post here or PM technical support.

[Perryking]

TMS470 would be great

[alclot]

It will be amazing ++++

did you plan to add TMS470 family onto this programmer ?

[sv2hqx]

Also if possible spansion family
Example s6j3xxxx