VVDI PROG

**CarCity** · 2nd June, 2020, 06:02 AM

Originally Posted by p1et

I have w211 HC12 EIS 211 545 10 08 (I guess 3K91D). VVDI Prog manual say use cable V3 but on picture with connection there is V1 cable (it tell to use V2 or modify V1).

So which cable do I need to use? After I've seen that, I decided to first try with R260 blue clone but it keeps linking and can't communicate with MCU.

I'm gonna try with VVDI but need be 100% sure which cable to use, in order to avoid (or minimalize) risk with that tricky 3k91d.

I have xprog also which I used once in the pasgt with this mask and all good (auto verify OFF) but seen multiple opinions that xprog damage them also:

UPDATE:

OK I tried with V3 cable, communication OK, reading completed but file filled with zeros.

So I tried my Xprog 5.0 clone and voila, read succesfull, keys generated and EIS is working with new keys

UPDATE 2: Blue R260 clone also read this MCU no problem but with some software trick.

Anyone succeed reading W211 HC12 EIS with VVDI Prog recently?

I read and write some time with success when you first read EEPROM all is zero so the first read FLASH then read EEPROM

**siemon** · 2nd June, 2020, 06:01 PM

helo
ihave this issue with vvdi prog after update to v. 4.9.4 when i need to read it give me this error DB25 NOT CONECTED WHAT IS THE PROBLEM THANKS

**Manuelgb** · 2nd June, 2020, 06:43 PM

do you have pinout for mercedes san CGW 5M48H?

**figani** · 6th June, 2020, 04:51 PM

today first time tried an 9s12xep768 with vvdi prog...
connected all well...
first eee, and all FFFF....
tried also pflash, it reads, but four times reading and everytime different...
but OK, shit happend...

but after pressing read, there was a sound to hear from vvdi prog HW...
through reading process it starts to hum...
not loud, but it was clear to hear...

somebody had something like that sound...?

**hivrich** · 6th June, 2020, 07:39 PM

Hey.
Perhaps you knows if the vvdi prog will read the data from renesas R5F61XXX.
Thanks.

**p1et** · 6th June, 2020, 09:40 PM

Originally Posted by figani

today first time tried an 9s12xep768 with vvdi prog...
connected all well...
first eee, and all FFFF....
tried also pflash, it reads, but four times reading and everytime different...
but OK, shit happend...

but after pressing read, there was a sound to hear from vvdi prog HW...
through reading process it starts to hum...
not loud, but it was clear to hear...

somebody had something like that sound...?

So vvdi erased chip data?? What exactly module was that?

**figani** · 7th June, 2020, 08:46 AM

Originally Posted by p1et

So vvdi erased chip data?? What exactly module was that?

Yes, all FFF...
It was motor engine ecu with mcu 9s12xep768...
Mask was 4M...

**Komisar13** · 15th June, 2020, 05:44 PM

VVDI Prog Bosch ECU Adapter only for reading or for some also for writing?
BMW EDC17CP45 only read ? or writing

**lion0304** · 16th June, 2020, 03:02 AM

Originally Posted by p1et

I have w211 HC12 EIS 211 545 10 08 (I guess 3K91D). VVDI Prog manual say use cable V3 but on picture with connection there is V1 cable (it tell to use V2 or modify V1).

So which cable do I need to use? After I've seen that, I decided to first try with R260 blue clone but it keeps linking and can't communicate with MCU.

I'm gonna try with VVDI but need be 100% sure which cable to use, in order to avoid (or minimalize) risk with that tricky 3k91d.

I have xprog also which I used once in the pasgt with this mask and all good (auto verify OFF) but seen multiple opinions that xprog damage them also:

UPDATE:

OK I tried with V3 cable, communication OK, reading completed but file filled with zeros.

So I tried my Xprog 5.0 clone and voila, read succesfull, keys generated and EIS is working with new keys

UPDATE 2: Blue R260 clone also read this MCU no problem but with some software trick.

Anyone succeed reading W211 HC12 EIS with VVDI Prog recently?

I've failed too and report sometime ago. W209 with 1L85D, read write fine with Xprog 5.