i always use it with xprog
i always use it with xprog
ttzag (28th October, 2016)
Its only for ism with 9s12 i think
Actions speak louder than words
Megane 3 985105478R airbag. 95640.
Orange 5 clone xprog 5.51 clone, and upa clone, read's it in circuit.
VVDI-PROG, reads al FF.
M35080 was erased with r270, and vvdi can't do-it.... e65 dashboard.
? Maibe mine is broken.
Last edited by dorofteius; 28th October, 2016 at 08:08 PM.
mcu>st>st10fxxx
Actions speak louder than words
thank you friend,checked dump,this programer use the default low baudrate 9600bps to read data.
VVDI PROG changed baudrate to 153600bps to decrease read time
baudrate change step:
1.Use low baudrate 9600 wakeup the chip, if get the correct response,go to step2
2.Start change baudrate, due to the d70f3624 doesn't know own osc frequency,programer need send it the accurate value
(VVDI PROG put some common-used osc value,so you can see try frequency xxxxhz info)
3.Programer send the new baudrate value to d70f3624, vvdiprog use 153600bps
the d70f3624 can calculate the new baudrate with the osc value, but if the osc value is incorrect,you will get a wrong baudrate
(eg: the actual osc is 4Mhz, if you set a 8Mhz osc value and change the baudrate to 153600bps the chip will set a 76800bps)
4.Use the new baudrate to communicate
Maybe the osc frequency is not in VVDI PROG osc value list
Please grab a new dump with vvdiprog,need to further analyze of the problem.
Last edited by Samic; 29th October, 2016 at 08:31 AM.
autodigitec (29th October, 2016), CaioW (4th November, 2016), daxxer (29th October, 2016), Hayssam1 (29th August, 2019), PremierD (29th October, 2016)
daxxer (29th October, 2016)
I did not do-it in circuit. 35080 i mean.
I still have that chip.
Last edited by dorofteius; 29th October, 2016 at 09:36 AM.
for w221 ism with ST10F269 read by vvdi prog OK with micromax diagram (thank u).
for write it didnt erase automatically you have to erase it before, then all OK .
Actions speak louder than words
daxxer (29th October, 2016)
all st10 must be erase before write.
daxxer (1st November, 2016)
Mates i've got ews4 bmw try to read it with vvdi prog failed 5 times any idea ?
NO ADVERTISING PLEASE
daxxer (1st November, 2016)
daxxer (1st November, 2016)
daxxer (1st November, 2016), Nassreddine84 (2nd November, 2016), rola1971 (1st November, 2016)
Bookmarks