VVDI PROG

[phara0n]

hi have anyone managed to read 4J74Y on EIS W639??!! because there is no schema inside VVDI, ive made the same wiring as 1L02M, and added the CLK wiring to PIN59 but cant crack the chip ... maybe ive lost something onto my way, any help would be very apreciated

[daxxer]

hi have anyone managed to read 4J74Y on EIS W639??!! because there is no schema inside VVDI, ive made the same wiring as 1L02M, and added the CLK wiring to PIN59 but cant crack the chip ... maybe ive lost something onto my way, any help would be very apreciated

use wiring as 1L02M + OSC to 59pin = right and enough....but for read choice from MCU --> MC68HC(9)08 --> HC908AZ60 EEP (4J74Y) and success....i read through this way more 4J74Y in W639 EZS all successfully readed
wiring diagram for this MCU in W639 EZS coming soon in some next VVDI Prog SW update i think...

i make some pictures of this type W639 EZS with this MCU and with other one as 3K85K too

20170409_111854.jpg 20170411_113553.jpg

[Levanime]

we will add M35080 M35160,maybe within 2 months will support.

Samic,
R270 can read/write delete incremebt with SOIC clip
it is not possible to do it with VVDI Prog,
do you plan to add it? with SOIC it reads garbage data (Tried two different SOICs, reads same)
will you add that too?

its comfortable to have this support not to waste time on soldering

[solitaire]

v4.5.7 (2017-04-21)
* This version DON't need update
firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.7
version in Doc folder
* Fix some MC68HC(9)08 read error
problem
* Fix PIC12F(16F) diagram error
problem
+ Add TC1762-CAN,
TC1766-CAN options
in <2-MCU>-><INFINEON-TRICORE>
+ Add STM8AF5179,
STM8AF5268, STM8AF5269, STM8AF5286, STM8AF5288, STM8AF5289, STM8AF528A, STM8AF52A6, STM8AF52A8, STM8AF52A9, STM8AF52AA, STM8AF6168, STM8AF6213, STM8AF6223, STM8AF6223A, STM8AF6246, STM8AF6248, STM8AF6266, STM8AF6268, STM8AF6269, STM8AF6286, STM8AF6288, STM8AF6289, STM8AF628A, STM8AF62A6, STM8AF62A8, STM8AF62A9, STM8AF62AA, STM8AL3136, STM8AL3138, STM8AL3146, STM8AL3148, STM8AL3166, STM8AL3168, STM8AL3188, STM8AL3189, STM8AL318A, STM8AL31E88, STM8AL31E89, STM8AL31E8A, STM8AL3LE88, STM8AL3LE89, STM8AL3LE8A, STM8AL3L46, STM8AL3L48, STM8AL3L66, STM8AL3L68, STM8AL3L88, STM8AL3L89, STM8AL3L8A, STM8L051F3, STM8L052C6, STM8L052R8, STM8L101F1, STM8L101F2, STM8L101F3, STM8L101G2, STM8L101G3, STM8L101K3, STM8L151C2, STM8L151C3, STM8L151C4, STM8L151C6, STM8L151C8, STM8L151F2, STM8L151F3, STM8L151G2, STM8L151G3, STM8L151G4, STM8L151G6, STM8L151K2, STM8L151K3, STM8L151K4, STM8L151K6, STM8L151M8, STM8L151R6, STM8L151R8, STM8L152C4, STM8L152C6, STM8L152C8, STM8L152K4, STM8L152K6, STM8L152K8, STM8L152M8, STM8L152R6, STM8L152R8, STM8L162R8, STM8L162M8, STM8S003F3, STM8S003K3, STM8S003C6, STM8S003K6, STM8S007C8, STM8S103F2, STM8S103F3, STM8S103K3, STM8L105C4, STM8L105C6, STM8L105K4, STM8L105K6, STM8L105S4, STM8L105S6, STM8S207C6, STM8S207CB, STM8S207K6, STM8S207K8, STM8S207M8, STM8S207MB, STM8S207R6, STM8S207R8, STM8S207RB, STM8S207S6, STM8S207S8, STM8S208C6, STM8S208C8, STM8S208MB, STM8S208R8, STM8S208RB, STM8S903F, STM8S903K options
in <2-MCU>-><ST-STM8>
+ Add ME17.9.11.1(TC1762) option
in <3-ECU>-><KIA>
+ Add MED17.1(TC1766) option
in <3-ECU>-><VOLKSWAGEN>
+ Add EIS-W639(1J35D),
EIS-W639(3K85K),
EIS-W639(4J74Y) options
in <4-IMMOBILIZER>-><BENZ>
+ Add JIEFANG-J6-HCS300 option
in <4-IMMOBILIZER>-><FAW>
* Change JIEFANG-J6-BCM option
(Support up to 5 remotes)
+ Add SENOVA-D60 option
in <5-DASHBORAD>-><BAICMOTOR>
+ Add EADO option
in <5-DASHBORAD>-><CHANGAN>
+ Add TRUMPCHI-GS4 option
in <5-DASHBORAD>-><GACMOTOR>

https://mega.nz/#!6ogjmSaS!znPbO1GfG...lnWUdJQGSqz5q4

[ttzag]

kia me 17.9.11 can't crack the chip.
even the photo is wrong connection ..this is the right one from galletto

Sent from my SM-A520F using Tapatalk

[bga100]

Nec D70F3356 in radio RCD510 reads only to 98% and then you get information "read error". Did enyone have such a problem? Can someone help me?
D70F3356 Read Error.jpg

[gilahish]

Hi, do you guys know if is there any way of byuing v1 and v2 cables? mine were ruined

[daxxer]

Hi, do you guys know if is there any way of byuing v1 and v2 cables? mine were ruined

where are you from ?

[ibratex]

Samic this is best clear i can do .. after i will prepare the jimny suzuki fotos again

Enviado do meu SM-J320FN atrav?s de Tapatalk

Please can someone put the dots ....thanks

Enviado do meu SM-J320FN atrav?s de Tapatalk

[bmw335coding]

anyone has an picture for the connection M35080/080D0WQ for vvdi? there is a point but which pin is it? big thanks

[gilahish]

where are you from ?

Usa, didnt find any dealer who can sell the cable separately

[daxxer]

Usa, didnt find any dealer who can sell the cable separately

on aliex are available separately, check it there...

[testit34]

on aliex are available separately, check it there...

Hi
These guys have cables for VVDI at good price.
http://www.vvdikeytool.com
Thanks

[rebi77]

Hi.

Please help me.

Please write to step by step.. CAS4 cloning procedure.. (if possible) I have two cas4, ori and donor.. I need cloning.. I have VVDI programmer..

Best Regards!

[ypt]

Hi.

Please help me.

Please write to step by step.. CAS4 cloning procedure.. (if possible) I have two cas4, ori and donor.. I need cloning.. I have VVDI programmer..

Best Regards!

If MCU is same, i think you just have to copy eeprom from one to other...