VVDI PROG

[CarCity]

Some pic from Siemens ECU for use all
Not : in all Siemens ECU cut pin 18 AMIS IC or
Pin 1 L9613







Sent from my iPhone using Tapatalk

[CarCity]

And Siemens - Continental gear ECU
C5 - 206 - 407 - ...







Sent from my iPhone using Tapatalk

[Samic]

i tryed to read EMS3134, says chip not conect, try read ME 7.4.4, same problem, cannot read anny ecu that uses 29fxxx, wath can be wrong?

friend, please check your device adapter whether inside wires connection good as sample photo.
if check same but still cannot read let me know.

1.jpg 2.jpg

[LEORNARD NKATA]

hie samic
i am trying to read immobilizer for jeep with immo box 5wy7 005c with masket 0j66d but i cant manage its giving me an saying chip unconnected.

[Samic]

hie samic
i am trying to read immobilizer for jeep with immo box 5wy7 005c with masket 0j66d but i cant manage its giving me an saying chip unconnected.

post your connection wires here, will check for you.

[Samic]

I'm ready to try it :-)....

SAK-C167CS-AM29 beta version download link:

[LEORNARD NKATA]

post your connection wires here, will check for you.

here is the connection wires diagram

[labusas]

Mine was update, is it still a correct way like in my pic? or should I go back to what in you post Samic?

friend, please check your device adapter whether inside wires connection good as sample photo.
if check same but still cannot read let me know.

1.jpg 2.jpg

[paul_12345]

.....Thanks

[sniegavirs]

.............

[sniegavirs]

You should practice more with soldering. That red wire soldered to the chip can make a lot of things not happening..

Mine was update, is it still a correct way like in my pic? or should I go back to what in you post Samic?

[automotrizVIP]

I assault copper tip 5 cm...with insulation to avoid contact between them, only the tip use.to facilitate a better contact for better precision

[automotrizVIP]

SAK-C167CS-AM29 beta version download link:

Today I'll start ... but I have only 2 versions

[Faraday]

I bought vvdi prog, but I'm disappointed right now. For example v850 d70F3629 I can't read it but uusp on the same pinout read ok (I use mcu reflash cable V3 like on manual)

[dorofteius]

Mate. You never have enough programmers.
Upa, orange, smok Jtag, vvdi, r270, x-prog, necprog, 35080 eraser, etc.
They all have goods and bads...