VVDI PROG

[bursuc]

I attach some pictures. Regards

[bursuc]

I attach some pictures. Regards

Now i desolder the yellow battery and i always have red light. I can see FW verzion and update it but red light is constantly on...
Any advice on this?

Thanks in advantage!

[kevfield]

yes send back to who ever you buy from because firmware is damaged because you disconnect batt...

Thanks Kev

[automotrizVIP]

which option you tested and please post here the unit clearly PCB photos.

Photo of ecu... 3132. Siemens...
..
20171117_134746.jpg]

[Samic]

Now i desolder the yellow battery and i always have red light. I can see FW verzion and update it but red light is constantly on...
Any advice on this?
Thanks in advantage!

friend, your device must send back for repair, will check the caused reason and solve the problem.
one more thing, without technical permission, any problem don't working on device PCB directly,
otherwise factory will refuse to repair. PM me your device SN, i will explain to factory.

[derdud]

Today i got new VVDI EWS3 ADAPTER but is not working to read test unit (EWS3 0D46J).
tryed vvdi prog version 4.6.4 and 4.6.3
X-Prog read same unit with no problem.

[automotrizVIP]

[2017-11-22 15:28:02] : Select <Read ID>
[2017-11-22 15:28:02] : Check Device...
[2017-11-22 15:28:04] : 12V Power Adaptor unconnected
[2017-11-22 15:28:04] : Initialization device...
[2017-11-22 15:28:04] : Initialization success!
[2017-11-22 15:28:05] : Initialization chip...
[2017-11-22 15:28:06] : Start communication...
[2017-11-22 15:28:06] : End communication...
[2017-11-22 15:28:06] : Operation success
[2017-11-22 15:28:06] : ID:01
read ok verify ok .....

USE
from read ecu renault EMS 3132 Siemens pin out ok .....
indicates the pins with arrows......
RED---------VCC
black-------GND
COFFE------TXDO
ORANGE---RXDO
BLUE-------POL.4
GREEN-----POL.5 PIN 29
YELLOW----RESET

[valdirld]

Samic, i made the modifications like in soft pict

friend, please check your device adapter whether inside wires connection good as sample photo.
if check same but still cannot read let me know.

Attachment 486090 Attachment 486091

[dustin2014]

Today i got new VVDI EWS3 ADAPTER but is not working to read test unit (EWS3 0D46J).
tryed vvdi prog version 4.6.4 and 4.6.3
X-Prog read same unit with no problem.

I tried VVDI EWS3 adapter.Worked fine for me.Can't remember which software version I used.

[giorgioma]

I bought vvdi prog especially for unlock kia/hyundai smart keys, but i can't buy renew files somewhere, how can i get them? I'm a bit disappointed, I can not use it for what I bought. Samic maybe you can help me?

[lalaina74]

I bought vvdi prog especially for unlock kia/hyundai smart keys, but i can't buy renew files somewhere, how can i get them? I'm a bit disappointed, I can not use it for what I bought. Samic maybe you can help me?

May be a vvdi key tool is better for you.

Envoyé de mon MI PAD 3 en utilisant Tapatalk

[fytfh]

I bought vvdi prog especially for unlock kia/hyundai smart keys, but i can't buy renew files somewhere, how can i get them? I'm a bit disappointed, I can not use it for what I bought. Samic maybe you can help me?

some file for hyundai key pass in pm

[giorgioma]

Don't forget to send me pass please, thank you

[ibratex]

Mate ... in vvdi prog the pcf adpter will read and reset sec but you cant write ..i tried a lot 1 month every day ...samic said dosent need verify but its the same i write eerom vvdi and eeprom the key is always locked i wass working on nissan smartkey 4 buttons ..... even on adapter dosent read at all only onboard

Samic we need solution pleease

Sent from my SM-G935F using Tapatalk

[giorgioma]

I unlocked BMW F series smart key and Hyundai Sonata key HMFNA04 i have not exactly this renew file but i wrote there HMFFEU04 file and tango detected it as factory unlocked key. I have not tested on car it yet. I hope it will work. You are right last lines doesn't eraseing and writing but anyway tango detects as new key.