VVDI PROG

[sniegavirs]

Dash mini cooper, 9s12dg128 sec, no work, no success very bad tool, r260 working fast very well

I have done 2 of them with no problem!

[amigokola]

You mean it r/w good EEPROM/FLASH from 2J74Y, 1J35D, 4J74Y ??

what you have for problem with HC908 ? i read this mcu very well everytime success

[Griunvaldas]

Has anyone been successful in unlocking pcf7952 of a Nissan smart key? Have tried both chip and in circuit but it is still remains locked.

Sent from my A718 Xplora Plus using Tapatalk

Anything for keys except BMW doesn't work. I have eeprom and erom files for them all - still no success to write them back

[automotrizVIP]

Anything for keys except BMW doesn't work. I have eeprom and erom files for them all - still no success to write them back

["Click on "Reset protection" to unlock the chip and erase all data on the chip.
If the information in the dialog box is "Read ... (0%) Read error"
It means that the chip is encrypted and can not read data........"
]....

IF WE CARRY OUT THIS PROCESS, the problem is the chip It is not reusable...
but this chip model can be reused with SKP 900 IN ANOTHER CAR% 100...

[autocheck]

["Click on "Reset protection" to unlock the chip and erase all data on the chip.
If the information in the dialog box is "Read ... (0%) Read error"
It means that the chip is encrypted and can not read data........"
]....

IF WE CARRY OUT THIS PROCESS, the problem is the chip It is not reusable...
but this chip model can be reused with SKP 900 IN ANOTHER CAR% 100...

It will remain in locked state if you read the key DATA , but would have reset protection successfully.



Sent from my A718 Xplora Plus using Tapatalk

[autocheck]

["Click on "Reset protection" to unlock the chip and erase all data on the chip.
If the information in the dialog box is "Read ... (0%) Read error"
It means that the chip is encrypted and can not read data........"
]....

IF WE CARRY OUT THIS PROCESS, the problem is the chip It is not reusable...
but this chip model can be reused with SKP 900 IN ANOTHER CAR% 100...

Did you try it out on a Nissan with proxy start/stop button successfully??

Sent from my A718 Xplora Plus using Tapatalk

[auto techniek]

Hi

How good is the pin calculation option?

Does it work for all listed cars? What about Vin to Pin?

[CarCity]

Hi

How good is the pin calculation option?

Does it work for all listed cars? What about Vin to Pin?

.................................................. ..............................................

[koyot]

It's a bit too much for one tool a low cost

[sniegavirs]

....................

[auto techniek]

It's a bit too much for one tool a low cost

It seems I m asking complicated question. Pls confirm if these pin calculation option works or not. Need to decide to buy or not.

[sniegavirs]

If that is the main reason you want to buy it then don't. It is programmer mostly.

Feedback: Did BMW 2013 F06 dashboard mileage correction. Erased first 2 lines in 160D0WQ with no problem without adapter.
Also did CAS4 5M48H Backup/Unlock/Read/Write with no problem and without heating the chip to 70+ degrees!

[auto techniek]

I wanna know what the programmer can and if it wil add any value to my collection

I did play with the software but without hardware you can t test it

[igorr]

I was litle play with vvdi prog immo fiat hc908 dont work
mcu not conected tried on 1H56A and 0J66D

[Majone]

I play with Golf 6 dash Magneti mareli with 1M80F MCU secured and no read this. Vvdi se Mcu ID but can't crack Mcu.
I desecured Mcu and read as like unsecured with vvdi, read corect eeprom and flash but write flash get error .
Will be nice to read 1M80F secured because is no to many tools wich can do that. I read this with R270 but R270 read ok flash
and for eeprom no know corect address.

regards, Mihai