VVDI PROG

**dashtool2016** · 6th May, 2019, 09:55 PM

I have a problem with my vvdiprog programmer causing a short circuit connecting an airbag unit and now my device does not turn on by usb only turn on when I put external 12v power it recognizes the pc but can not read any chip shows device error 10 can someone know how to fix this problem ? Thank you

**Maartinj** · 7th May, 2019, 06:21 AM

Originally Posted by dashtool2016

I have a problem with my vvdiprog programmer causing a short circuit connecting an airbag unit and now my device does not turn on by usb only turn on when I put external 12v power it recognizes the pc but can not read any chip shows device error 10 can someone know how to fix this problem ? Thank you

contact seller for repair/return procedure

**jodge** · 7th May, 2019, 04:49 PM

Originally Posted by vasa

Use another programmer no need any cut wire. This is for me better work.... Or use witt VVDI ISP eeprom adapter. Work as professional...

if not cut the wires the cpu will wake up..and blocking the SPI bus bcose the SPI protocolls only one master interface allowed and in this case the programmer MUST be the master not the CPU. You can halt the cpu thru the reset pin if you can reach it. On kline isn't possible. But the reset pin it is the same side like the eeprom
The vvdi eeprom adapter working only if you phisically see and able to connect to the eeprom. But you can't bcose the it is on the pcb inner side. If you prefer to desolder or cut these pin rows and sockets on the picture is it's your call. I choose the cuttung. It's fast and safe

**nemena** · 8th May, 2019, 04:33 PM

Originally Posted by hojo25

There is no adapter anymore.
It must be installed other EEprom.

http://www.xhorsevvdi.com/wholesale/...w-adapter.html

Yes, but how do you program 35160DW? What do you select in vvdiprog?

**hojo25** · 8th May, 2019, 07:07 PM

Originally Posted by nemena

Yes, but how do you program 35160DW? What do you select in vvdiprog?

I choose this one.

35160DW.jpg

**figani** · 9th May, 2019, 11:13 AM

Originally Posted by nemena

Yes, but how do you program 35160DW? What do you select in vvdiprog?

In this thread you`ll find it...
but here again...

When I help you press Thanks and Reputation...

**ibratex** · 9th May, 2019, 03:42 PM

help me !!!!!!!!!!!!!!!!
today my vvdiprog fell on the ground my worker didnt pay atention now i plug into usb the drivers in device manager are good but always say device error check usb driver
i had installed on both laptops same problem so i dissasembled the device found out that the battery 3v inside was lose negative i soldered again but its the same what should i do ????

**exe123** · 9th May, 2019, 03:53 PM

Originally Posted by ibratex

help me !!!!!!!!!!!!!!!!
today my vvdiprog fell on the ground my worker didnt pay atention now i plug into usb the drivers in device manager are good but always say device error check usb driver
i had installed on both laptops same problem so i dissasembled the device found out that the battery 3v inside was lose negative i soldered again but its the same what should i do ????

If battery was removed, security data is gone. You need to send in for repair.
There is nothing you can do on your own.

**nemena** · 9th May, 2019, 07:15 PM

Thank you!
It worked fine on a bmw bike from 2018.

**ibratex** · 9th May, 2019, 10:50 PM

ok thanks !!!... maybe they should do more secured way to us before securing their mcu ..nothing perfect

**jodge** · 10th May, 2019, 06:02 PM

Originally Posted by ibratex

ok thanks !!!... maybe they should do more secured way to us before securing their mcu ..nothing perfect

yeah this Dallas based secu is literally garbage when your customers far away from you. If the backup battery is depleted or removed like your no way to fix

BTW SMOK using the same s.hit
There is plenty of same level security stuffs, without battery or simillar things i mean bulletproof stuffs

**ASCM** · 10th May, 2019, 08:01 PM

hello does anyone know the steps to read THE DATA {DFLASH PFLASH EEPROM AND POF}RFA RANGE ROVER
DO I NEED TO CLICK RESET SIGURITE BEFORE READING ?

**rob h** · 11th May, 2019, 08:37 AM

1.Use "Reset Sec"unlock chip, the original security byte displayed in the window below
2.Read/write D-FLASH, EEE, P-FLASH and POF data, the command can be executed many times
3.Use "Set Sec", input the security byte read from step 1

There are non secured, and secured.

**ASCM** · 11th May, 2019, 11:51 AM

i think for only for writing its need to click reset sigurite not for backup

**baze007** · 13th May, 2019, 10:31 PM

Originally Posted by jodge

Bcose the two pcb and the two inner pin rows difficult to acces to the eep
EEP = 95160

You must cut the red cross marked wires! (when you finished connect again)

Its to difficult with vvdi connection....use upa