VVDI PROG

[alclot]

v4.8.7 (2019-9-19)
* This version DON't need update firmware
* Fix BOSH ECU ADAPTER READ BUGs
+ Add VVDI PROG USER MUNUAL 4.8.7 version in Doc folder
+ Add R7F701062, R7F701064 ,R7F701067 options in <2-MCU>->
+ Add SCENIC(2007) options in<4-IMMOBILIZER>->
+ Add E3 options in<5-DASHBOARD>->
+ Add TIGGO5(2014) options in<5-DASHBOARD>->
+ Add 300(2005) options in<5-DASHBOARD>->
+ Add SOUTHEAST-DX3(2016) options in<5-DASHBOARD>->
+ Add FRM-SRS options in<8-OTHER>->


https://mega.nz/#!itZURCbQ!8GoEieiNP...WcAgcMvhl5HQM8
Password:123456]

Done, Thanks

[K1nd3r]

someone had issue, what vvdi prog stop reading motorola processors (tried cas4, cas3, cas2)? eeprom read ok, tried to repair firmware, but always getting server connection error

[pocinas]

Hi There.

Have some one else schemat.. pinout of BOSH ECU ADAPTER cable, for AVDI PROG, which was released newly.

Thanks

[figani]

Hi There.

Have some one else schemat.. pinout of BOSH ECU ADAPTER cable, for AVDI PROG, which was released newly.

Thanks

you meand for VVDI Prog...?
when yes, as I see it not support N57/your car (until now)...

[pocinas]

Yes for vvdi prog. They i see was some.realase but in my opinion is not worth for me spend £85 for cable which i can build self much cheaper (if is not some pcb with parts on DB25 Case..

[exe123]

It's not a simple cable. Some more electronics is involved to enable Bosch TSW mode. So forget to build it on your own

[daxxer]

It's not a simple cable. Some more electronics is involved to enable Bosch TSW mode. So forget to build it on your own

yes, forget to build your own cable
anyway in the price of cable are online calculation of the ISN...
its not only about few wires and that everything...

[ibratex]

hello how are you , here i am trying to read bcm from chevrolet sonic
BCM CONTINENTAL:

• MCU NEC(RENESAS) D70F3469 + EEPROM 25160

i managed to do pinouts and detected id C437B046B334B6B9

but its encrypted , as i did search md flasher can do it ,, so please an update would be great for us and vvdiprog name

thanks alot

screen.jpg

[solitaire]

If NEC is locked, you can’t read it. Just obd solution
http://ioterminal.com/?page_id=1098

[jodge]

Nissan Airbag module pinout Bosch 0285001318 Nissan 98820 5M302

pinout.jpg

[sniegavirs]

Can anyone explain what is this meant for?
http://www.vvdishop.com/wholesale/bm...n-adapter.html
Is it for no-desolder read/write on FEM/BDC units?

[PremierD]

Yes......................

[pocinas]

yes, forget to build your own cable
anyway in the price of cable are online calculation of the ISN...
its not only about few wires and that everything...

Yes you have right my Friend.

I ordered one cable of this, and just arrived and i can confirmed, there is 2 chip, few maybe transistors, diodes, resistors and capacitors.. Is not worth to build own for this money.

''anyway in the price of cable are online calculation of the ISN'' how i can activate this function on my VVDI prog? then

[figani]

Yes you have right my Friend.

I ordered one cable of this, and just arrived and i can confirmed, there is 2 chip, few maybe transistors, diodes, resistors and capacitors.. Is not worth to build own for this money.

''anyway in the price of cable are online calculation of the ISN'' how i can activate this function on my VVDI prog? then

I thought not neccessary to activate anything, maybe I´m wrong (?)...
read ecu with internet online...
offline not possible...

[hivrich]

Hey.
The program stopped starting (4.8.7 and 4.8.6). Windows 7
Mistake:
Running the program is impossible due to lack of NetClient.dll

There may be information on how to fix this problem.
thank