VVDI PROG

[tazz75]

Here it is Pass : 123456
https://easyupload.io/ltv41t

[dustin2014]

Hi.
I, trying to read an EIS with 2 1L02M chips from a 2005 Mercedes Vito but keep getting error " Chip does not support"
Never had a problem reading these before.
Anything else I can try?
Cheers

1l02m.jpg

[autoTkey]

Has anyone had the EEPROM problem and how were you able to fix it?
VVDIprog reads everything EXCEPT EEPROMs. No matter if clip or adapter is used.
Is sending to China the only way to fix this?

[Maartinj]

Has anyone had the EEPROM problem and how were you able to fix it?
VVDIprog reads everything EXCEPT EEPROMs. No matter if clip or adapter is used.
Is sending to China the only way to fix this?

your dealer should help you

[autoTkey]

Yep, China it is

[kristikapa]

Hello.

Anyone tried to reset volvo airbag ecu with rh850? I managed to read the processor but when trying to write it always fails.

[autoTkey]

Hello.

Anyone tried to reset volvo airbag ecu with rh850? I managed to read the processor but when trying to write it always fails.

Do you erase it before you write ?

[atalayyildiz]

I've never heared clone version is availble for VVDI (Xhorse) but the tool is very helpful and chip umbrella is quite large. In case any help needed about this, I can help to DK members without request money.. I recommend all of you to buy TSOP48 adapter as well. Price is aroun 600 euros in Turkey and selling to other country as well. Due to forum rules, I cannot share the seller link but you can search by google.

[autoTkey]

There was a clone version long time ago. There isn't such thing anymore.

[u.s]

you mean this AP Pro2 Programmer ....
https://www.aliexpress.com/item/1005...47291313%21sea

[Maartinj]

Yep, China it is

in EU I can help you

[autoTkey]

you mean this AP Pro2 Programmer ....
https://www.aliexpress.com/item/1005...47291313%21sea

Actually I was talking about the VVDI2 clone in FVDI but this is very interesting too, although extremely expensive for a clone.

[Supas]

Hello everyone!
Did anyone manage to delete NEC V850 70F3425 from VDO VW dash?




I know it's a read protected chip... I have read done by can but I need to erase it to rewrite it, but I can't do it due to frequency problems, the error in vvdiprog is "Try Frequency failed(00)".
I tried with various frequency values and the error continues.
Thank you very much

[Inavon]

Hello everyone!
Did anyone manage to delete NEC V850 70F3425 from VDO VW dash?




I know it's a read protected chip... I have read done by can but I need to erase it to rewrite it, but I can't do it due to frequency problems, the error in vvdiprog is "Try Frequency failed(00)".
I tried with various frequency values and the error continues.
Thank you very much

I have same error with RH850 & V850. VVDI support answered that need send vvdi prog to the factory. Their engineers say that.

[Supas]

I have same error with RH850 & V850. VVDI support answered that need send vvdi prog to the factory. Their engineers say that.

Obviously they have no idea why it happens... I'm getting a little tired of the lousy support...

Is there any other equipment I can buy for that job?