Opel Insignia 2011 year
Body r/w vvdi prog
pinout for all DK
Mask 2M42E
MC9S12XDG128MAL
Hi,
Need to work 100%, but you need to work with big precision to not make short circuit on pcb or anothers mistakes !
If open the device and solder on pcb to connect in paralel second battery in some test points which go at - and + of ori battery, after you can unsolder safe the ori battery and replace it with new one or with new one with more capacity if fit in the sampe position in pcb to solder it, after can remove the second battery what it was solder in paralel for not lose the voltage when replace the ori battery, for not lose the data licence what have the tool !
This metod need to work for all device what have RTC with battery inside and need it to be replaced at some time the battery, like for: VVDI Prog, VVDI2, FVDI, AVDI, SMOK, Iprog Pro, ....
Last edited by Seby_TM; 14th July, 2021 at 02:43 PM.
Opel Insignia 2011 year
Body r/w vvdi prog
pinout for all DK
Mask 2M42E
MC9S12XDG128MAL
IF I HELPED YOU, PLEASE REMEMBER TO PRESS THANKS AND REPUTATION.
alclot (15th July, 2021), brane0001 (19th September, 2021), brodaty (30th August, 2021), danielif (30th July, 2021), dawidhubert (9th August, 2021), daxxer (2nd August, 2021), duzi (14th July, 2021), habbyb (16th August, 2021), lock66 (23rd August, 2021), ricked (16th July, 2021), scotlock (14th July, 2021)
Opel Insignia
IF I HELPED YOU, PLEASE REMEMBER TO PRESS THANKS AND REPUTATION.
Botos Leonardo (14th July, 2021)
Ford/Volvo i TC222 SRS- yes working
Hello
Regarding TC222 SRS
Change to 2-MCU-->INFINEON-TC2XXX-->TC22X-16F
[2021-07-16 11:53:14] : Change to <DFLASH>
[2021-07-16 11:53:14] : Change to <DFLASH>
[2021-07-16 12:02:28] : Change to <DFLASH>
[2021-07-16 12:02:29] : Change to <DFLASH>
[2021-07-16 12:02:49] : Check Device...
[2021-07-16 12:02:50] : 12V Power Adaptor unconnected
[2021-07-16 12:02:50] : Initialization device...
[2021-07-16 12:02:54] : Initialization success!
[2021-07-16 12:02:55] : Initialization chip...
[2021-07-16 12:02:55] : VCC setting error
[2021-07-16 12:03:13] : Check Device...
[2021-07-16 12:03:15] : 12V Power Adaptor unconnected
[2021-07-16 12:03:15] : Initialization device...
[2021-07-16 12:03:15] : Initialization success!
[2021-07-16 12:03:16] : Initialization chip...
[2021-07-16 12:03:16] : VCC setting error
[2021-07-16 12:03:34] : Check Device...
[2021-07-16 12:03:36] : 12V Power Adaptor connected
[2021-07-16 12:03:36] : Initialization device...
[2021-07-16 12:03:36] : Initialization success!
[2021-07-16 12:03:37] : Initialization chip...
[2021-07-16 12:03:37] : VCC setting error
[2021-07-16 12:04:35] : Check Device...
[2021-07-16 12:04:36] : 12V Power Adaptor connected
[2021-07-16 12:04:36] : Initialization device...
[2021-07-16 12:04:36] : Initialization success!
[2021-07-16 12:04:37] : Initialization chip...
[2021-07-16 12:04:37] : VCC setting error
[2021-07-16 12:04:43] : Check Device...
[2021-07-16 12:04:45] : 12V Power Adaptor connected
[2021-07-16 12:04:45] : Initialization device...
[2021-07-16 12:04:45] : Initialization success!
[2021-07-16 12:04:46] : Initialization chip...
[2021-07-16 12:04:46] : VCC setting error
[2021-07-16 12:04:48] : Check Device...
[2021-07-16 12:04:50] : 12V Power Adaptor connected
[2021-07-16 12:04:50] : Initialization device...
[2021-07-16 12:04:50] : Initialization success!
[2021-07-16 12:04:51] : Initialization chip...
[2021-07-16 12:04:51] : VCC setting error
[2021-07-16 12:04:56] : Check Device...
[2021-07-16 12:04:58] : 12V Power Adaptor connected
[2021-07-16 12:04:58] : Initialization device...
[2021-07-16 12:04:58] : Initialization success!
[2021-07-16 12:04:59] : Initialization chip...
[2021-07-16 12:04:59] : VCC setting error
[2021-07-16 12:05:01] : Check Device...
[2021-07-16 12:05:03] : 12V Power Adaptor connected
[2021-07-16 12:05:03] : Initialization device...
[2021-07-16 12:05:03] : Initialization success!
[2021-07-16 12:05:04] : Initialization chip...
[2021-07-16 12:05:04] : VCC setting error
[2021-07-16 12:08:21] : Change to <DFLASH>
double post get used
i try to read 80pin mcu
just have to lift pin 68
Last edited by clauberty; 16th July, 2021 at 11:24 PM.
Screenshot_20210702-231051_Chrome.jpg
3 pin lift 80.79.68
Hello , need an info pls , for vvdi prog sell an eeprom clip adapter.
What is the use of it and how connect it?
Thanks
Ford fiesta 201720210717_105225.jpg
danielif (30th July, 2021)
PSA SPC560Screenshot_20210713-153725_Gallery.jpg
butugan_mihai (9th September, 2021)
hi
having problem to read eprom st 95256wt with eprom solder adapter v2.0 . Eprom is from a bmw fem unit.
had som other eproms i also couldnt read. just get message chip not connected.
if put the v2.0 adapter in my orange 5 it reads without problem.
anyone experienced this ? could there be something wrong with the vvdi prog ?
Anyone? Still wont read 95xxx eproms.
Last edited by MBSERVICENORWAY; 9th August, 2021 at 10:43 PM.
VVDI Prog
-------------------------------------
v5.0.5 (2021-07-29)
* This version DON't need update
firmware
+ Add MPC5632M,
MPC5633M,
MPC5634M,
options in
<2-MCU>-><MOTOROLA-MPC563X>
+ Add CR16MCS9V,
CR16MCT9V,
options in
<2-MCU>-><NATIONAL>
+ Add R7F701417,
R7F701437,
R7F701441,
R7F701442,
R7F701461,
R7F701462 options in
<2-MCU>-><RENESAS-RH850>
+ Add BUICK-REGAL-BCM(MC9S12XDP512)
option in <4-IMMOBILIZER>-><BUICK>
+ Add S350 SRS(CR16MCT9VJE7)
option in <7-AIRBAG>-><BENZ>
many thanks to friend kevfield
SRS Temic
Old BMW E39
mcu 912B32 R/W vvdi prog
pinout all DK
IF I HELPED YOU, PLEASE REMEMBER TO PRESS THANKS AND REPUTATION.
dawidhubert (23rd August, 2021), daxxer (2nd August, 2021)
- 是的,我可以从中国寄给你
Bookmarks