VVDI PROG

[cristofir]

YOU NEED TO REPLACE A FILE IN VVDI PROG TO Allow writing

[Supas]

YOU NEED TO REPLACE A FILE IN VVDI PROG TO Allow writing

What question raised by your colleagues are you referring to?

[peko]

Hello

i need read HC11A8 mask F92J

But in wiring instruction i must connect grey wire CLK but not see wich on MCU v3 cable

[hivrich]

MC68HC11A8 - pin 7(CLK)

[ttzag]

hello guys
any one have pinout to read cluster on kia picanto 2018 MB91FXXX by vvdi prog ??
i tried this method without success

[shpuncik]

Hello

i need read HC11A8 mask F92J

But in wiring instruction i must connect grey wire CLK but not see wich on MCU v3 cable

it's not grey, CLK is white cable in group 2. check MCU wiring in VVDI PROG. they just couldn't show white cable on white background

[shpuncik]

hi
has anyone tried reading MB91F526 with success?
trying to read CY91F526LKC from Alfa Romeo body ECU and can't read it - both dflash and pflash return FFs.

[rob h]

https://www.digital-kaos.co.uk/forum...nnections-help

Not just you with vvdiprog.

You could post partnumbers, and pinouts you tried.

Connect and read id? Does it show you this?

[drdahmani2]

Hi dear
is it possible to use xhorse solder free adapter (MQB 3524) with other programmers (I have an adaptor that I would like to try with orange etc)
or is there anyway to bypass MQB license authorization (which I don't have)
Thanks

[moldo25]

VVDIPROG freescale mac7241 write problem.
I have a bmw srs with mcu freescale mac7241 I write flash but when I check it is totally different .
can someone help me??

[neriuks007]

Hello,will do cloning vvdi prog volvo xc60 cem 2011?

[Kostigan]

HellowIMG_20240412_180434.jpg! Is there any problems with wrighting spc560p34l1? I'm trying to clear crash in geely srs unit. Mcu reading is good, but when i try to write -erase error.
P.s. sorry, if i post a question in a wrong thread.

[rtbdiagnostic]

Toyota spansion S6j3001lsj mcu used in corolla yaris etc can vvdi prog read and write