VVDI PROG

**hitechservis** · 26th May, 2020, 09:10 PM

Hi there
Now i see that is special thread about Vvdi prog...
I have "misunderstandings" with immo box from old car...
So mcu is Motorola 0j66d I am try to read with option immo box fiat immo box 0j66d but no successful...them I desolder and try direct like on vvdi blog how to read hc08 and still nothing (but did not solder 8mhz crystal)...
Car is lancia Lybra 2003y and immo box is imm100.10.
Is there solution or who did read this mcu or any help..

**Fec001** · 27th May, 2020, 09:23 AM

Anyone did Jimny 2016 MB91F061 dash before? I can read dump but get write error at 0%

**s qubiak** · 27th May, 2020, 03:43 PM

https://mega.nz/file/9BUWHIaa#tFvd0j...lmR19FYFJae_Ek

VVDI prog V4.9.4

http://blog.vvdishop.com/vvdi-prog-v...r7f701330-mcu/

**Diablotic** · 27th May, 2020, 04:31 PM

4.9.4 changelog?

**s qubiak** · 27th May, 2020, 06:14 PM

Originally Posted by Diablotic

4.9.4 changelog?

http://blog.vvdishop.com/vvdi-prog-v...r7f701330-mcu/

**hitechservis** · 27th May, 2020, 07:42 PM

Originally Posted by hitechservis

Hi there
Now i see that is special thread about Vvdi prog...
I have "misunderstandings" with immo box from old car...
So mcu is Motorola 0j66d I am try to read with option immo box fiat immo box 0j66d but no successful...them I desolder and try direct like on vvdi blog how to read hc08 and still nothing (but did not solder 8mhz crystal)...
Car is lancia Lybra 2003y and immo box is imm100.10.
Is there solution or who did read this mcu or any help..

Just did it ...put mcu on adapter board...with 12mhz osc and read like 0j66d...

**Maartinj** · 28th May, 2020, 06:39 AM

VVDI PROG latest software version V4.9.4 update

>>>DOWNLOAD<<<

v4.9.4 (2020-05-26)
* This version DON't need update firmware
+ Add VVDI PROG USER MUNUAL 4.9.4 version in Doc folder
+ Add R7F701330 option in <2-MCU-><RENESAS-RH850>
+ Add FENGJUN-7 option in <5-DASHBOARD-><GREATWALL>
+ Add TOYOTA-RAV4 option in <5-DASHBOARD-><TOYOTA>
+ Add BAOJUN-310/560 AIRBAG option in <7-AIRBAG-><SAICMOTOR>
+ Add T300 AIRBAG option in <7-AIRBAG-><ZOYTE>
+ Add NEW VISION AIRBAG option in <7-AIRBAG-><GEELY>
+ Add BAODIAN AIRBAG option in <7-AIRBAG-><JMC>
+ Add LYNKCO-AIRBAG option in <7-AIRBAG-><LYNKCO>
+ Add SRS-VW62 option in <7-AIRBAG-><VOLKSWAGEN>
+ Add AUDI-AC-CONTROLLER(R7F701548) option in <8-OTHERS-><AUDI>
+ Add FRM-E-SERIES-XDT256 option in <8-OTHERS-><BMW>
+ Add ESCORT-BCM option in <8-OTHERS-><FORD>
+ Add 8th-SONATA-AC-CONTROLLER option in <8-OTHERS-><HUNDAI>
+ Add SKODA-RADIO-STREAM option in <8-OTHERS-><VOLKSWAGEN>

**autoTkey** · 28th May, 2020, 07:52 AM

Not much use in this new update - still missing some important Motorola MCUs.

**ASCM** · 29th May, 2020, 07:14 PM

Hello why xhorse does not add cas4/cas4+ editor in menu why hexprog it have that?

Sent from my SM-J415F using Tapatalk

**figani** · 30th May, 2020, 08:05 AM

Originally Posted by ASCM

Hello why xhorse does not add cas4/cas4+ editor in menu why hexprog it have that?

Sent from my SM-J415F using Tapatalk

why hexprog does not add 35160wt cloning with id in menu vvdi prog has that...?

**daxxer** · 30th May, 2020, 09:16 AM

Originally Posted by autoTkey

Not much use in this new update - still missing some important Motorola MCUs.

what type you mean ?

**comizelu** · 30th May, 2020, 09:17 AM

Originally Posted by figani

why hexprog does not add 35160wt cloning with id in menu vvdi prog has that...?

Why do you have to mention 35160wt when it can't read-write 24c04?

Sent from my MI MAX 3 using Tapatalk

**p1et** · 30th May, 2020, 03:34 PM

I have w211 HC12 EIS 211 545 10 08 (I guess 3K91D). VVDI Prog manual say use cable V3 but on picture with connection there is V1 cable (it tell to use V2 or modify V1).

So which cable do I need to use? After I've seen that, I decided to first try with R260 blue clone but it keeps linking and can't communicate with MCU.

I'm gonna try with VVDI but need be 100% sure which cable to use, in order to avoid (or minimalize) risk with that tricky 3k91d.

I have xprog also which I used once in the pasgt with this mask and all good (auto verify OFF) but seen multiple opinions that xprog damage them also:

UPDATE:

OK I tried with V3 cable, communication OK, reading completed but file filled with zeros.

So I tried my Xprog 5.0 clone and voila, read succesfull, keys generated and EIS is working with new keys

UPDATE 2: Blue R260 clone also read this MCU no problem but with some software trick.

Anyone succeed reading W211 HC12 EIS with VVDI Prog recently?

**figani** · 30th May, 2020, 07:33 PM

Originally Posted by comizelu

Why do you have to mention 35160wt when it can't read-write 24c04?

Sent from my MI MAX 3 using Tapatalk

which device can´t read 24c04 write?

**ASCM** · 1st June, 2020, 08:52 PM

Originally Posted by p1et

I have w211 HC12 EIS 211 545 10 08 (I guess 3K91D). VVDI Prog manual say use cable V3 but on picture with connection there is V1 cable (it tell to use V2 or modify V1).

So which cable do I need to use? After I've seen that, I decided to first try with R260 blue clone but it keeps linking and can't communicate with MCU.

I'm gonna try with VVDI but need be 100% sure which cable to use, in order to avoid (or minimalize) risk with that tricky 3k91d.

I have xprog also which I used once in the pasgt with this mask and all good (auto verify OFF) but seen multiple opinions that xprog damage them also:

UPDATE:

OK I tried with V3 cable, communication OK, reading completed but file filled with zeros.

So I tried my Xprog 5.0 clone and voila, read succesfull, keys generated and EIS is working with new keys

UPDATE 2: Blue R260 clone also read this MCU no problem but with some software trick.

Anyone succeed reading W211 HC12 EIS with VVDI Prog recently?

I readed and writed this type of esz with ak 500
Everytime perfect

Sent from my SM-J415F using Tapatalk