marti88 (4th April, 2021), racin-snake (7th April, 2021), thephenom (5th April, 2021), weza247 (8th April, 2021)
Oh and by the way if my post has been at all helpfull
please press the little THANKS tab
marti88 (4th April, 2021), racin-snake (7th April, 2021), thephenom (5th April, 2021), weza247 (8th April, 2021)
VVDI Prog v5.0.1 (2021-04-02)
* This version DON't need update
firmware
+ Add R5F140_Data_8KB_Write,
R5F140xLx_Flash_512KB_Write,
R5F140xKx_Flash_384KB_Write,
options in
<2-MCU>-><RENESAS-RL78-G13A>
+ Add R5F10J/10K_Data_2KB_Write,
R5F10J/10KxCx_Flash_32KB_Write,
options in
<2-MCU>-><RENESAS-RL78-G1C>
+ Add R5F11AxJx_Flash_256KB_Write,
R5F11AxHx_Flash_192KB_Write,
R5F11AxGx_Flash_128KB_Write,
R5F11A_Data_8KB_Write,
options in
<2-MCU>-><RENESAS-RL78-G1D>
+ Add R5F11Ex8x_Flash_8KB_Write,
R5F11ExAx_Flash_16KB_Write,
options in
<2-MCU>-><RENESAS-RL78-G1G>
+ Add R5F109_Data_4KB_Write,
R5F109x8x_Flash_8KB_Write,
R5F109xAx_Flash_16KB_Write,
R5F109xBx_Flash_24KB_Write,
R5F109xCx_Flash_32KB_Write,
R5F109xCx_Flash_48KB_Write,
R5F109xEx_Flash_64KB_Write,
options in
<2-MCU>-><RENESAS-RL78-F12>
+ Add SPC564B64 option in
<2-MCU>-><ST-SPC564XXXX>
+ Add CAS1-2K79X/0L01Y option in
<4-IMMOBILIZER>-><BMW>
+ Add BUICK-IMMO(2013)(HC08ASxx)
option in
<4-IMMOBILIZER>-><BUICK>
Last edited by daxxer; 3rd April, 2021 at 06:17 AM.
many thanks to friend kevfield
ahmed_mo (4th April, 2021), castin (3rd April, 2021), habbyb (5th April, 2021), hacking (28th July, 2021), hivrich (3rd April, 2021), immoneard (8th May, 2021), InchisNonStop (6th April, 2021), marti88 (4th April, 2021), musti418 (3rd April, 2021), polys123 (5th April, 2021), PumaNoob (8th May, 2021), racin-snake (7th April, 2021), teerak2uk (10th April, 2021), thephenom (5th April, 2021), vasiliev7719 (7th April, 2021), weza247 (8th April, 2021)
VVDI Prog v5.0.1 (04/02/2021)
* This version does not need update
firmware.
Does this mean that for this version you need To Update VVDI PROG?
immoneard (8th May, 2021)
Atmega1280 have pinout misunderstanding and unclear color cable in VVDI Prog, some one can inform Xhorse for fix and correct and update photo with correct connections.
I try to read Atmega1280 with pinout color how is in photo from VVDI Prog but is not correct and not worked, after some test I find a solution to read and get ID of mcu but is show me ID: 53535353, if I read eeprom or flash the content data inside is all buferr is 53.
I think VVDI Prog not read this type of MCU correct or my adapter V3 is not good.
Some one try until now to read Atmega1280 to confirm us if can read correctly or not with VVDI Prog ?
After some tests if I see not worked with VVDI Prog to read or write this MCU, I try to read it with Smartprog2 from Elnec and read it and write correctly the all data in Atmega1280.
Thanks
Last edited by Seby_TM; 7th April, 2021 at 08:39 PM.
immoneard (8th May, 2021)
1.MPC5607B 0N69H - harici güç MY STEP ile doğru
taxo1965 (27th April, 2021)
how to read FORD RANGER BCM MC9S12XEP768 with VVDI PROG?
thanks in adcance
where is cdc3217G micronas support?
marti88 (23rd April, 2021)
If any hackers in da house
https://mobile.twitter.com/cybergibb...48540575334404
Was Banned For Being Certifiably Insane and Stupid
how sensitive is this one to read 29f400BB i have adapter and it reads but with errors and verified errors as well and if no errors reading and verified ok still some info missing from flash
VVDI PROG V5.0.2
-------------------------------------
v5.0.2 (2021-04-30)
* This version DON't need update
firmware
+ Add D160XX(ST),
D80XX(ST)
M35080XX(ST),
M35160XX(ST)
options in
<1-EEPROM&FLASH>-><SPECIAL-FUNCTION>
+ Add R5F10A/10B_Data_4KB_Write,
R5F10AxAx_Flash_16KB_Write,
R5F10A/10BxCx_Flash_32KB_Write,
R5F10A/10BxDx_Flash_48KB_Write,
R5F10A/10BxEx_Flash_64KB_Write,
R5F10A/10BxFx_Flash_96KB_Write,
R5F10A/10BxGx_Flash_128KB_Write,
options in
<2-MCU>-><RENESAS-RL78-F13>
+ Add R5F11B_Data_4KB_Write,
R5F11BxCx_Flash_32KB_Write,
R5F11BxEx_Flash_64KB_Write,
options in
<2-MCU>-><RENESAS-RL78-G1F>
+ Add R5F11Z_Data_2KB_Write,
R5F11ZxAx_Flash_16KB_Write,
options in
<2-MCU>-><RENESAS-RL78-G1P>
+ Add STM32F103xC,
STM32F103xE,
STM32F105x8,
STM32F105xB,
STM32F105xC,
options in
<2-MCU>-><ST-STM32>
+ Add Mitsubishi-Eclipse
Cross-BCM(D70F3380) option in
<4-IMMOBILIZER>-><Mitsubishi>
+ Add CEM-V40-2014(SPC560B60L7)
options in
<4-IMMOBILIZER>-><VOLVO>
+ Add CEM1(R5F64524)
options in
<4-IMMOBILIZER>-><VOLVO>
+ Add SRS(MC9S12DG128-UNSECURED)
options in
<7-AIRBAG>-><Hyundai>
+ Add ELANTRA-INDOOR-DISASTER-BOX(--17)
options in
<8-OTHER>-><Hyundai>
-----------------------------------------------------
Download link:
Last edited by daxxer; 30th April, 2021 at 06:25 AM.
many thanks to friend kevfield
ALBERTO_ (30th April, 2021), andrym3 (3rd May, 2021), ASCM (3rd May, 2021), dawidhubert (2nd May, 2021), dimet (30th April, 2021), hacking (28th July, 2021), immoneard (9th May, 2021), KADE007 (30th April, 2021), PumaNoob (8th May, 2021), rob h (1st May, 2021), scotlock (1st May, 2021), shuvarec (5th May, 2021), taxo1965 (4th May, 2021), TERMINATOR1000 (3rd May, 2021), vasiliev7719 (12th May, 2021)
VVDI can't erase TC234 p-flash,d-flash.
In status line U can see "erase error" and in flash make some stupid changes.....
hey
would anyone know is it possible to use vvdi prog to erase vin and mileage on 35128wt chip used in in the new new f20 clusters.
Meat-Head (8th May, 2021)
Bookmarks