VVDI PROG

[p1et]

Renesas v850 D07F3633 read/write both D_Flash and P_Flash 100% OK.

[Proteccion Car]

Hi, have any of you been able to read the BCM T4 N2VS with MCU ST-SPC560B60L5 for Renault Logan II Model 2017?

Is it possible?

Thank you for their answers.

[raptors]

I'm interested in how I can read full flash from pCR2.1 with VVDI PROG. The connection is clear to me but did not know how to put it in ecu boot to read the VVDI PROG. Do you use resistors at GALLETTO V54 or otherwise.
Thank you for your help.

[trinicolin]

Any pin out SIM2K-241?

Sent from my SM-G930F using Tapatalk

[p1et]

Hi, have any of you been able to read the BCM T4 N2VS with MCU ST-SPC560B60L5 for Renault Logan II Model 2017?

Is it possible?

Thank you for their answers.

I know people who tried and failed because it's somehow protected by Renault and cannot be read. But maybe someone have solution...

[alclot]

Hi mates,
Can anyone help me with the pinout to read this mercedes unit?
Thanks in advance

[Maartinj]

[p1et]

Hi mates,
Can anyone help me with the pinout to read this mercedes unit?
Thanks in advance

This is HC05 or HC08?

[keymax]

Hi mates,
Can anyone help me with the pinout to read this mercedes unit?
Thanks in advance

Remove it. It’s an HC05. Don’t try reading incurcuit. One bad connection and you’ll corrupt.
Wouldn’t use the vvdiprog either.
Original Xprog works great.


Sent from my iPhone using Tapatalk

[p1et]

Clone Xprog also great for HC05, I read many HC05 with 5.0 clone and always work.

[keymax]

Clone Xprog also great for HC05, I read many HC05 with 5.0 clone and always work.

He’s telling the truth. I keep a couple hidden away just in case.


Sent from my iPhone using Tapatalk

[lion0304]

Clone Xprog also great for HC05, I read many HC05 with 5.0 clone and always work.

The best xprog clone is 5.5.1 and there are no problem to read HC05 with adapter.

Orange 5 clone work also great HC05 on adapter and many others

[megavl]

Anyone have read renesas 70F3577 daihatsu BCM? i have read new bcm but cant stable, every read, always displays different data, I try the environment Read + verify, always ask to be reset, after that device error, does my vvdiprog have a problem?

Does anyone have dumps from the block?

[Samic]

VVDI PROG latest software version 4.8.6 update
-------------------------------------
v4.8.6 (2019-9-02)
* This version DON't need update firmware
+ Add VVDI PROG USER MUNUAL 4.8.6 version in Doc folder
+ Add ME17.5.22(TC1724)(ADAPTER), MEVD17.2.4_Exx(N20)(ADAPTER), MEVD17.2.4_Exx(N20)(ADAPTER), MEVD17.2.4_Fxx(N20)(ADAPTER),
MEVD17.2.9_Fxx(N20)(ADAPTER), MEVD17.2.9_Exx(N20)(ADAPTER), MED17.5.25(TC1782)(ADAPTER), MED17_5_22(TC1782)(ADAPTER),
MEVD17_2_3(B38)(ADAPTER), MEVD17_2_K(B38)(ADAPTER), MEVD17.2.5(ADAPTER), MEVD17.2.8(ADAPTER), MEVD17.2.H(ADAPTER),
MEVD17.2.P_Fxx(N20)(ADAPTER), MEVD17.2_Fxx(N55)(ADAPTER), MEVD17.2.G(N55)(ADAPTER),MEVD17.2.6(N55)(ADAPTER)
options in <10-BOSH-ECU-ADAPTER>-><BMW> (Need BOSH ECU ADAPTER)
+ Add ME17.5.22(ADAPTER), MED17_5_25(ADAPTER) options in <10-BOSH-ECU-ADAPTER>-><VOLKSWAGEN>(Need BOSH ECU ADAPTER)

download link:
https://mega.nz/#!Po5XBYBJ!ohwyr2AxA...L4oLekAxuTxN80

[autoTkey]

Yeah, even after so many updates of VVDI Prog cheap Xprog clone still better on Motorolas...