Your problem is immo security now not pass. Need to bdm original file.
Regards,
Good evening gents,
new day - new challenges (new ~~~~ up
Today I was playing around with the updated Kess v2 and wanted to write an ori file back to an EDC16 on a BXE Skoda Octavia when above message appeared on the screen.
I have tried Writing and also Recovery without success - this message comes up on Kess.
Any idea how to overcome this?
HW:
SW: 1037382414
VIN nr.: TMBHS21Z172108082
SW ver.:
Spare:
Engine: R4 1,9L EDC
HW Ver.:
SW upg.: 03G906021LB 9251
Installation:
1. ID was read
2. ori was read
3. altered file was written (with wrong immobiliser info)
4. tried to write ori back - no success
5. battery disconnected for 10 mins
6. tried to write ori back - no success
7. tried to write ori back as recovery - no success
Your problem is immo security now not pass. Need to bdm original file.
Regards,
yourmate (12th June, 2015)
Dont sound good, then, as eeprom, unless you got full back up of eeprom, which i doubt.
immo off, or dealers.
your not having much luck mate,
yourmate (12th June, 2015)
Now no choice obd work, need open ecu and work directly on it on bench to get it recovered.
Regards,
Well, depends how you look at it - I AM having serious fun
BTW, you right no pro would do that
This is a non runner from my mate's junkyard - had a problem not receiving a proper signal from the camshaft sensor so they dumped it and I had no better idea but play around So it's not really an issue, more of a challenge.
Could have I done a full backup by OBD anyway with Kess?
Also I reckon for immo off I need different tools, don't I?
not really mate, part read or full its normally just flash, kess,
eeprom needs to be read bdm or removed and read, willem i think
yes would be immo off i think all you can do
but immo off is another tool, I reckon
EDIT: And a different subforum
Last edited by yourmate; 12th June, 2015 at 01:38 PM.
No mate its eeprom, which you can write over bdm nothing special required, and immo yes another sub forum on DK, but many guys on this part capable of immo off solution, no biggy
yourmate (14th June, 2015)
I've not done any harm today
i want to ask i bought kess v2 and2.47 firmware but i can't read the ford mk3 2.0 tddi 115 hp
somebody could help what's wrong
says that change of session is not posibble
reads another car
passat golf ford galaxy renault skoda ...
stekker7 (19th January, 2020)
I don't understand I'm a beginner
just bought the kess v2
how to do that?
Bookmarks