Drawning laguna 1.9dci 2002

[noslen]

Hi to all!

I have an 2002 renault laguna 1.9dci 120cv and i want to know if i can use a full set of 2.2dci to make this one work because my wheell lock and UCH dont work.
Of corse i need to adjuste the file to manage the 1.9 engine

Tanks in advance

[Shmortz]

you can make your old ECU virgin, it will code himself to UCH when put ignition ON

[noslen]

how can i do that???
My ecu is in good condition, i can read all files from it

[Shmortz]

read eeprom 5p08 and post here

[noslen]

Ok... I will read it tomorow
Thanks m8

[noslen]

Here is my file
5P08ori.bin.rar

[noslen]

I can't figure out the problem..all seams to be OK but engine don't turn....I have another set without steering lock so I'll try to virgenize mine and put it there
Just put all 24c full with FF right?

Thanks in advance

[renatec]

Hi noslen
you can't use 2.2dci injection ecu however you can use UCH and steering lock, steering lock chip 24C04 erase fill with FF and uch if you change chassis number using Renault explorer you can then reprogram with clip, injection computer needs to be same software number but part number not so important, you can reprogram injection computer also with clip which removes immo until ignition cycled and same for steering lock
regards
lynndon

[noslen]

Thanks...I'll try and post result
Thnaks again m8