Everything Carprog...

[FxShaw]

OK. Is any sense to upgrade AT91SAM7S256 to higher hw?

Wont gain much at all..but the timer will drop from 250 to 50 if I recall correctly...better off with 4.01
its a great programming as is so all you need is some brain power and you are good to go.

[WinWoj]

Wont gain much at all..but the timer will drop from 250 to 50 if I recall correctly...better off with 4.01
its a great programming as is so all you need is some brain power and you are good to go.

i'm not sure i understood correctly 4.01 sw which i use now counting down?? when i assume f...n target 50 should reprog via jling hw and 250 one more time?

[FxShaw]

Hardware counting down from 250ish since you have v 4.01...50ish counting down is for v4.74... Stick to what you got.

[WinWoj]

Hardware counting down from 250ish since you have v 4.01...50ish counting down is for v4.74... Stick to what you got.

so lower frequency of jlinkin' is using 4.01 ver

[Frankcar]

anyone can help me ? i need a photo of good A1 that not have problem. i lost A1 cable and now i found a A1 adapter of my friend and now can't connect to car. my carprog original
i know that this adapter china

[teerak2uk]

anyone can help me ? i need a photo of good A1 that not have problem. i lost A1 cable and now i found a A1 adapter of my friend and now can't connect to car. my carprog original
i know that this adapter china

Yes jumper to pin 16 is correct but r4 or r5 are incorrect search thread and you will see

[otojm]

anyone can help me ? i need a photo of good A1 that not have problem. i lost A1 cable and now i found a A1 adapter of my friend and now can't connect to car. my carprog original
i know that this adapter china

hi,i made my mod like this original pic and it's ok . regards
(ps: resistor 10k is SMD package code 1002)

[Frankcar]

-Resistance R1 = 10K (103 )
-Resistance R4 = 10K (103 )
- R5 = ? Resistance or Capacitor ?
-Capacitor C2 = 100nf
-Short Pin 16 OBD to Transistor

[otojm]

-Resistance R1 = 10K (103 )
-Resistance R4 = 10K (103 )
- R5 = ? Resistance or Capacitor ?
-Capacitor C2 = 100nf
-Short Pin 16 OBD to Transistor

R5= cAPACITOR 100nf
all Resistance of 10k prefered 1002 (tolerance 1%) so they have more precision than 103 (tolerance 5%).

[Frankcar]

i found this link : please see

http://www.codecard.lt/carprog/carprog-repair-kit-4x-74hc125-4x-22uf-capasitors-1x-mcp2515/prod_566.html


2x tantalum or electrolytic capacitors for C8 and C9 ( 22?f 16v or 47?f 25v )

[otojm]

i found this link : please see

http://www.codecard.lt/carprog/carprog-repair-kit-4x-74hc125-4x-22uf-capasitors-1x-mcp2515/prod_566.html


2x tantalum or electrolytic capacitors for C8 and C9 ( 22?f 16v or 47?f 25v )

hi i have tantalum 10uf 16v .

[prochipper]

can anyone say something about carprog online 8.21 with 9.31 software thats offered on the internet?
what is the difference between the usuall one and the online version?
anyone any experiences

regards


Gesendet von iPhone mit Tapatalk

[eni8ma]

thanks was looking for this

[tamari]

i have a clone car prog 7.28 and its as it came i've used it once or twice on eeprom now i need to clear 01 accord module i dont know pin outs or what pin if needed to power the module it self i have supplies and know how just not much knowledge on car prog help would be awesome

on a15 adapter what is ground wire car prog keeps saying no device connected but i am using black for ground

my mistake this module is not on the list so how do i use adapter a17 and do i need the module on the car to proceed ?







Attachment 398476Attachment 398482

[prochipper]

i have a clone car prog 7.28 and its as it came i've used it once or twice on eeprom now i need to clear 01 accord module i dont know pin outs or what pin if needed to power the module it self i have supplies and know how just not much knowledge on car prog help would be awesome

on a15 adapter what is ground wire car prog keeps saying no device connected but i am using black for ground

my mistake this module is not on the list so how do i use adapter a17 and do i need the module on the car to proceed ?







Attachment 398476Attachment 398482

If this module is not listed i dont think that you have a chance to clear



Gesendet von iPhone mit Tapatalk