pitake (14th April, 2018)
You can't. Its encrypted!
FxShaw (22nd March, 2016)
Hi. Can I read AT91SAM7s256 with xprog? I think no way but just answer for case.
gsmnavi (22nd March, 2016)
thank you for this thread
and i have Question
i cant read any Motorola mcu with my careprog ?
how does the at88c get erased?
i have reprogrammed my carprog and at88c isnt effected
i know this, but i never remove it and neither do many others, i think the removal was originally mentioned just in case anything happened to it.
its been noted a few times that it dont need removing this is why im asking how does it get erased if only reprogramming the mcu, jtaging the mcu doesnt effect the at88c so how is it being erased ??
Also, I noticed that adapter A15 pinouot differs from the pinout diagram on the codecard website. Does anyone know what cable/color is for K -line on clone A15?
I have carprog clone 7.28. I have managed to read eeproms. But I have never been able to clear crash data directly, Is there something I need to do to this version? or only earlier versions need chip change/flash? thank you
Brown012 (22nd January, 2023)
Hi! Today I try to update cargprog with segger j-link on win7 32bit. When I start to programm this message comes on: Program (0x0 - 0x5B5) does not fit into selected flash sectors. I select ok and see what doing:
Initializing CPU core (Init sequence) ...
- Initialized successfully
- JTAG speed: 12000 kHz (Fixed)
- CPU clock frequency: 31248 kHz (Auto detected)
- J-Link found 1 JTAG device. Core ID: 0x3F0F0F0F (ARM7)
- Connected successfully
Programming target (1462 bytes, 1 range) ...
- Program (0x0 - 0x5B5) does not fit into selected flash sectors.
- Program relocated for programming by 0x100000 bytes
- RAM tested O.K.
- Target programmed successfully - Completed after 8.010 sec
Bookmarks