Hardware counting down from 250ish since you have v 4.01...50ish counting down is for v4.74... Stick to what you got.
WinWoj (21st July, 2016)
anyone can help me ? i need a photo of good A1 that not have problem. i lost A1 cable and now i found a A1 adapter of my friend and now can't connect to car. my carprog original
i know that this adapter china
Last edited by Frankcar; 21st July, 2016 at 01:21 PM.
Frankcar (22nd July, 2016), FxShaw (22nd July, 2016), martinracing (14th November, 2017), satalightmad (24th June, 2017)
-Resistance R1 = 10K (103 )
-Resistance R4 = 10K (103 )
- R5 = ? Resistance or Capacitor ?
-Capacitor C2 = 100nf
-Short Pin 16 OBD to Transistor
Last edited by Frankcar; 23rd July, 2016 at 07:59 AM.
Frankcar (27th July, 2016), repairmymodule (19th August, 2016)
i found this link : please see
http://www.codecard.lt/carprog/carprog-repair-kit-4x-74hc125-4x-22uf-capasitors-1x-mcp2515/prod_566.html
2x tantalum or electrolytic capacitors for C8 and C9 ( 22?f 16v or 47?f 25v )
Last edited by Frankcar; 27th July, 2016 at 08:12 AM.
can anyone say something about carprog online 8.21 with 9.31 software thats offered on the internet?
what is the difference between the usuall one and the online version?
anyone any experiences
regards
Gesendet von iPhone mit Tapatalk
thanks was looking for this
i have a clone car prog 7.28 and its as it came i've used it once or twice on eeprom now i need to clear 01 accord module i dont know pin outs or what pin if needed to power the module it self i have supplies and know how just not much knowledge on car prog help would be awesome
on a15 adapter what is ground wire car prog keeps saying no device connected but i am using black for ground
my mistake this module is not on the list so how do i use adapter a17 and do i need the module on the car to proceed ?
Attachment 398476Attachment 398482
Last edited by tamari; 18th September, 2016 at 02:17 PM.
Bookmarks