FxShaw (4th July, 2019)
Hello guys
A seller in ebay are selling a "carprog european version"
I want to buy one for testing so i want to know if this a better option than chineese version? Or is better to buy a chineese and jtag and modify myself thank you
https://www.ebay.com/itm/Carprog-Ful...gAAOSw2bFb1F7m
Description
all the modules in new programs.
.A NEW VERSION CARPROG!
FIRMWARE VERSION 8.21 and of 9.31
+ J1 adapter for test main unit & D1
Supports all the features, even
ONLINE!
.Programmer Stitched
processor completely redesigned is
ready to work!
.What distinguishes our programmer
Carprog from "other":
1. New firmware version from
euroclone, not Chinese !!!
All Chinese Carprog originally come
with firmware version 4.01 and serial
number with them: 081105CAR001773I
or 201213CAR000ME61. NEW
Firmware
update opens possibilities which are
not present on the old firmware when
new versions of the software. No
matter which version You use 4.01 or
9.31 - if the adapter firmware is 4.01, as
all Chinese Carprog functionality will
not change.
2.The device replaced the logic ( texas)
for stable read and write EEPROM 24C
series
.CarProg 8.21 , of 9.31 Is the updated version of 2016. NEW Firmware full version 4.74. Has greatly expanded the functional with respect to the previous versions with IOS 4.01. Carprog 8.21 \ 9,31 online works with the following software :
Carprog 8.17
Carprog 8.21 with a built-in emulator virtual servers
Carprog 9.31
The program opened a lot of modules that were previously unavailable (n/a).
The online version means that the functions that require a call to the server will execute as the program includes a server emulator.
This device will allow you to work with odometers, electronic control units, cars, blocks airbag (Airbag), and car stereos. Carprog allows to encode EEPROM and can create clones of car keys and snap a new one. The instrument has an onboard 16-bit microprocessor and computer automotive interface for all functions.
CARPROG was designed as a universal tool for odometers, Airbag units, engine control units, radios, EEPROM programming and manufacturing of additional keys.
Would be a good idea to ask about counter and what will happen after will reach 0...
When making a direct connection via obd 2 to clear an airbag module it should just be plug and play am I correct. My car is a bmw series
Sent from my SM-N960U1 using Tapatalk
Ok i will ask
motorbike59 (3rd July, 2020)
So where do we get a good eu clone? Any suggestions would be much appreciated
nexusjose (6th July, 2019)
just got my carprog but it will not connect to the software just comes up with "no device attached" anyone come across this problem before? its a clone from ebay would have thought it would have at least connected to the software. i have checked that it is picked up in device manager and it does its just not picked up in the carprog software. Any advice would be great thanks
I'm having some problems as far as the connections to my carprog and srs unit I am wondering how do you guys provide power to the unit and the actuall module were do you guys connect the 12volt wire
Sent from my SM-N960U1 using Tapatalk
Hello all friends.
Can I updating Fujitsu MCU MB91F on Carprog clone V9.31?.
Thank you.
rybenz (18th July, 2019)
Bookmarks