write flash to new ecu and do immo off
Hello Friends,
I want to ask if somebody can help me, i need to clone an EDC17CP14.
and i need to have the data swapped in the files.
in the attachment are the 2 data sets, the data from original needs to be swapped to the replacement ECU.
Mind that the SW versions are not the same! but both ECU's are HW:01 versions.
So swapping shut be possible.
Read/write will be done with MAGPRO2 master.
Here are the 2 file sets: EDC17CP14.rar
Thanks for your help.
write flash to new ecu and do immo off
your fixed file eeprom !
Last edited by rm23; 6th August, 2015 at 01:07 AM.
Thanks,
Gonna test on monday, i will keep you informed.
Did this work?
Could I clone the complete data with Ktag?
I m interessing to
+1
yes you can when you read the hole info on boot mode from the ecu and the hw number is the same just replase the second one ecu with the reading form the dead ecu and make immo off or like the "RM23" make - fix the eeprom and all fine .
Chiptuning/DPP/EGR/LAMBDA(O2)/FLAPS/Adblue/DTC OFF / EDC17 Immo OFF
Kess v2 eu. clone full/Ktag eu. Clone 6.070 full
Info on pm
Kess v2 ori , K-tag ori, MAGPro2 x17, Galleto v54 EU ,Winols ,AVDI full ori, Orange 5 /Omega /Xprog/Upa all ori , VAS Pc , Porsche PIWIS 2 and etc........
Bookmarks