>>>>>>Autohex II Support Thread<<<<<<<

**hagop1** · 21st August, 2015, 09:08 AM

need help ,
I have bmw e90 6 cylinder model 2006, I replaced the transmission from the junk with same as the car , but need to program the transmission, I always get this ecu is not ready , voltage is 13.8.
pleas help asap

**obdsystems** · 21st August, 2015, 09:25 AM

Hi

How come the AutoHex forum doesn't work ??

**PremierD** · 21st August, 2015, 09:33 AM

You have Autohex II then ?

**hagop1** · 21st August, 2015, 09:50 AM

yes I have autohex2

**hagop1** · 21st August, 2015, 09:55 AM

I have in the action list replace .

**hagop1** · 21st August, 2015, 10:27 AM

sorry the customer could not wait he went to another place to program it .
sorry for needing fast response .

**decno1** · 21st August, 2015, 03:37 PM

Hi Hagop1,
In the list of programmable ECUs, when you see a message (This ECU not Ready) means at least one of the following:
- ECU not responding (Dead ECU, or bad connection), usually you see part number is zeros.
- ECU is absolutely different from the vehicle and cannot be programmed on this car.

To make sure what is your ECU situation, just go to diagnose, if it has been detected, then it is alive but cannot fit this car. (example EGS 6HP with EGS 8HP...)
Please contact your dealer (or us) to activate some programming feature to bypass some restrictions in programming.

**hagop1** · 21st August, 2015, 07:19 PM

thanks for your response , if it is possible for you to activate the features for me , I will be happy I send you my serial , I am working on windows 7 64bit.

**decno1** · 21st August, 2015, 07:48 PM

Please contact dealer or us by email or by a call.

**Shanejohn** · 22nd August, 2015, 09:52 PM

Originally Posted by decno1

Please contact dealer or us by email or by a call.

hi guys!
who is the best to purchase from ?

**decno1** · 23rd August, 2015, 10:20 AM

This is a technical support thread. please keep it as is.

**decno1** · 26th August, 2015, 06:30 PM

Autohex BMW software version 1.0.22 has released today!

**autofan1965** · 31st August, 2015, 12:21 PM

There was description by Kia/Hyundai that autohex is able to do immo off by every ecu. No it is no more there. It was mistake or function is still available and work really on all types of ecu?

**decno1** · 1st September, 2015, 10:52 AM

I don't know where you read that Autohex II can do immo off in Kia/Hyundai. we never mentioned this.
The trick I guess to make the immo off is by using Autohex II GDS driver to force GDS to flash and ECU flash without immo into an ECU with immo.
this is just a guessing, I am not involved in Kia/Hyundai software.

**decno1** · 9th September, 2015, 05:32 PM

We made a video showing how to make a key when all keys lost with the help of Autohex II.
The case we showed here is the most difficult case that BMW locksmith may face.
All the job took only 2 minutes.