Hi Roth18
Although we have not test FRM on Bench, I think if you are using a JBE and CAS and FRM with the correct FA you should have no issue in flashing FRM,
Hi Roth18
Although we have not test FRM on Bench, I think if you are using a JBE and CAS and FRM with the correct FA you should have no issue in flashing FRM,
if you have x-prog orig..... or clone
you can do it , is very easy ,
all you need , you can find on DK....
I’m looking to buy autohex in the next few days, for cas4 can i use autohex to program by obd or do i need to still read cas eeprom?
CAS4 and CAS4+ yes you need to read eeprom
just had a continental msd81 flash erased while reading ISN with AVDI. question is would autohex have been possible to fix this?
see it has tricore reading ability - could i have copied data from another ECU ?
I am a FUD
If you erase it by obd the chances are very high.
If by boot mode (first flash sector is erased), I think it is impossible to be recovered because ISN and otp passwords are stored there.
AUTOHEX BMW Version 1.0.47
A new enhanced software version is available for all BMW Autohex users which rectified all issues regarding FEM/BDC unlock and more stabilized for programming ECU using E-net. Unlike the old versions getting secret file from FEM/BDC can be done all on bench. No need to go for advanced option for unlocking. software has become 100% safer and stable for programming FEM - GW and FEM - BODY on bench without any working key. Also Ethernet allows users to flash units like HU-H,KOMBI..etc in F series in reduced time period without any error.
[IMG][/IMG]
Last edited by decno1; 20th December, 2017 at 02:46 PM.
Levanime (21st December, 2017)
You mean a new FEM? If yes, the answer is you can of course.
Guys, anyone is getting code 834f on 11% when flashing modules ??? I have a MSV80 here on which I was trying to confirm the SK that I changed. Autohex cannot read without update and update cannot complete. Now I have 2FA3 DME: No coding DTC in the DME.
Last edited by roth18; 27th December, 2017 at 06:42 PM.
Best Regards, Roth.
Trying to encode the DME with Autohex gives me error 8112 .
Best Regards, Roth.
Ok taking on a big project, Customer purchased a bmw 2017 440i and it was completely flooded, which module need to be replaced to get the car running. I was thinking DME & FEM what else would you guys suggest?
Bookmarks