>>>>>>Autohex II Support Thread<<<<<<<

[topclef]

Please check this video, no component removed from this BCM

I saw this video two weeks ago , it's nice that no component be removed from PCB.
but this in not my question, i heard from a friend who has Hextag , read BCM without problem , but writing is not safe , unless you have improved it with last update.

[decno1]

There is no risk at all. HexTag was unable to write the D-Flash in some of 5M48H BCMs (50% of BCMs have this MASK), it was able to read in few seconds, but writing was not possible. The D-Flash remains unmodified, nothing is corrupted. Other masks 1L15Y, 2M25J , 3M25J and 1N35H are ok in read/write.
We solved this MASK in the new version, you can check this in our news.
Your friend had to say: Can read but cannot write.

[PremierD]

Game changer ???????

[ghostrider72]

Game changer ???????

Gonna test it tomorrow on 2014 116d. We’ll see how it goes

[djollie]

AutoHex II BMW Diagnostic Software Version 1.0.55

ISN Factory mode

Autohex II BMW Diagnostic software update is available for Autohex BMW users.

• ISN Factory mode is available in this version. With this function you can read/write ISN in DME and DDE besides to modify the working hours without opening the DME/DDE. We are happy to announce that Autohex II is the only tool that supports this feature.
• Flash data updated for BMW F and G series as well as MINI and Rolls Royce.
• Ecus calculations from BMW vehicle order has been enhanced to support latest models in F and G series.
• ISN by OBD II for F series has been enhanced to support more Ecus versions.
• ISN Boot mode has one more DDE to support.

[Fallen]

"Without opening the ECU"
With all keys lost? Need a working key?
How about a bit more information in your release news.

"Read on Bench" Ok, so no working key needed i'm guessing.

[ghostrider72]

"Without opening the ECU"
With all keys lost? Need a working key?
How about a bit more information in your release news.

"Read on Bench" Ok, so no working key needed i'm guessing.

You can read ISN from engine ecu with pin connection on the bench mate. No need to open ecu for it anymore.
Tested it already twice

[djollie]

AutoHex II BMW Diagnostic Software Version 1.0.56

MEVD1723 ISN Factory mode

Autohex II BMW Diagnostic software update is available for Autohex BMW users.

• ISN Factory mode for MEV1723 DME (MINI and F series) has been added in this version.
• EGS EWS Reset function is able to support more versions of EGS in F and G series.
• USB Driver has been upgraded to support latest versions of Windows 10.
• Power supply monitor in Autohex II HW4 has been improved to allow poor power supply to be able to work with AutoHex.

[roth18]

Game changer ???????

LOL, no but nice try.

[KriptoKey]

It is one of the best Tools that works perfectly with BMW, and is now complemented with Hextag.
very happy with this tool.
regards

[drugowaz]

Reset km fem bdc need first program prepare it like other tools?
Or possible reset km on before not program fem without preparing it?
Got one case. Guy sais fem was reseted to 0 ,buy buy accident he put dash with wrong km and fem need reset again. He told fem was reseted before,i connect it and fem is 100% not reseted i get messages before any operation furst program it.
So case first who was it brought to is liar or no. As i never hear any tool can reset km without first program it

[auto techniek]

I m considering buying this tool.

Is it worthy buying it.

I have vvdi 2 with BMW package.

[ghostrider72]

Yes, it is worth it. If you do a lot BMW’s off course

[Fallen]

edited by fallen

[ghostrider72]

Did you try them on Skype? They are very responsive on that.

Also... not sure if you aware but reading ISN requires additional 2 wires added to the loom