VVDI 2 new tool arrived

[Faraday]

Can you post pinout from db9 plug I've lost mine, will try by BDM tommorow

[qwojtus]

BMW m3 2010 with 9287534 cas3++ ID (istap)
Successfuly downgraded and new key added

Did you have to update CAS afterwards?

[Nassreddine84]

Yes right the car was fine it has already a programmed key i was just adding a key and the key was added successfully and car starts but the only issue is that the dashboard showing the SAFE msg down on the cluster so this is only the problem mates

Mates no chance to fix the safe msg by vvdi2 ?? Or what could be the alternative solution ?

[paul_12345]

Mates no chance to fix the safe msg by vvdi2 ?? Or what could be the alternative solution ?

read the cluster memory and post dump.

Far better of reading pin and programming with VCDS on older VAG or read cluster and use tango to add to dump.

[CaioW]

Did you have to update CAS afterwards?

Nope, device done all by him self

[Faraday]

Audi A5, 2008, file transfer error. I BDM and says it does not detect anything.

Have you fix it? I have same problem on Audi A5 2008


SAMIC can you check my logs?

[rola1971]

Have you fix it? I have same problem on Audi A5 2008


SAMIC can you check my logs?

you add key or all keys is lost?

[Nassreddine84]

read the cluster memory and post dump.

Far better of reading pin and programming with VCDS on older VAG or read cluster and use tango to add to dump.

Thanks paul for ur reply do u mean remove cluster and read it on bench or is it possible to read By obdii ?

[Faraday]

you add key or all keys is lost?

add key..........

[Nassreddine84]

Hi mates i have got audi RB8 add key situation i tried all the ways not possible to read neither ecu nor cluster what could be the problem is it because of the bad update or what this is the first audi that i try on vvdi2 plz reply thank u

[Nassreddine84]

[Nassreddine84]

Always says wait 10 min and after it finishes it starts from the begining

[ibratex]

hello mates , i am willing to buy vvdi2 basic version then next month buy the bmw and etc ...

my question is does basic function have almost TANGO basic functions ?

i know tango is perfect for my market in this country but i already have vvdi prog and for me vvdi2 basic is cheaper if it do add transponders by dump as if tango

i searched for car list for vvdi2 in basic module but didnt find thats why i am asking

thank you

[yugo45]

Always says wait 10 min and after it finishes it starts from the begining

What year is that car , I assume is AUDI A4?
Are you sure that car has MED17?
I never seen MED17 and RB8 cluster. I my be wrong

[Nassreddine84]

What year is that car , I assume is AUDI A4?
Are you sure that car has MED17?
I never seen MED17 and RB8 cluster. I my be wrong

Yugo i tried all the systems it is Audi A3 S line i tried the whole selections and nothing reacting with the car tried instrument cluster RB4 RB8 K-line UDS nothing at all i saw lately several thread same car RB8 having same problem need to know if this is a bug from the last update or what??