VVDI 2 new tool arrived

**Faraday** · 28th January, 2017, 06:14 PM

A3 rb8? depending on year it may be Fujitsu or micronas dash. Fujitsu dash is not supported by VVDI2

**Nassreddine84** · 28th January, 2017, 06:30 PM

Originally Posted by Faraday

A3 rb8? depending on year it may be Fujitsu or micronas dash. Fujitsu dash is not supported by VVDI2

Its is S3 FARADAY does it makes any difference i also tried with mvp it says remove dash and read micronas CDC24C32

**adrian1914** · 28th January, 2017, 11:13 PM

I have few customers who said that somebody have adjusted odometer and km in edc 17 car a4 2011. Is that possible without "magic wand " ? All done by obd2. Vvdi 2 can do only in dash. But how they make adjustment in Ecu??? Avdi?

**Nassreddine84** · 29th January, 2017, 10:22 AM

Again with the SAFE msg i got today audi A8 2008 with fingerprint option and also key option same as touareg key kessy system i pulled out the pincode and CS 7 bytes and tries to program the new key by adding key but again the safe comes out and esl opens close car starts and goes off directly plz help mates how to finailzs the job i did now immo off for allowing the customer to drive his car and he is coming back tomorrow any idea how to finalize the job?

**rob h** · 29th January, 2017, 12:58 PM

Hello Nassreddine84,

If ignition comes on, means you have the correct dealer key.
Not starting means, you still need to program the key with pin.
Check the ammount of Keys!
Check the configuration!

**labusas** · 29th January, 2017, 04:12 PM

Hi, Afer last update Not able to get Key Info for Bmw 3 series 2008 CAS3+. Had to use another tool bmw keycoder to program key. I had no problems with this CAS version (not updated by dealer) before last update.
Samic, if you read this, please advise if logs are required.

**rob h** · 29th January, 2017, 05:53 PM

A Happy new year, to Samic, and the Xhorse company!

**kevfield** · 29th January, 2017, 06:53 PM

Originally Posted by rob h

A Happy new year, to Samic, and the Xhorse company!

I second that , happy new year

Sent from my ZUK Z1 using Tapatalk

**Nassreddine84** · 29th January, 2017, 07:02 PM

Originally Posted by rob h

Hello Nassreddine84,

If ignition comes on, means you have the correct dealer key.
Not starting means, you still need to program the key with pin.
Check the ammount of Keys!
Check the configuration!

Hi rob and if the keys programmed the safe msg will disappear?

**rob h** · 29th January, 2017, 07:46 PM

Sure, why not!

Originally Posted by Nassreddine84

Hi rob and if the keys programmed the safe msg will disappear?

**yugo45** · 30th January, 2017, 01:49 AM

Originally Posted by Nassreddine84

Yugo i tried all the systems it is Audi A3 S line i tried the whole selections and nothing reacting with the car tried instrument cluster RB4 RB8 K-line UDS nothing at all i saw lately several thread same car RB8 having same problem need to know if this is a bug from the last update or what??

A3 do not have RB8 cluster, It is Micronas 24c32.That is your problem.

**yugo45** · 30th January, 2017, 01:53 AM

Originally Posted by Nassreddine84

Again with the SAFE msg i got today audi A8 2008 with fingerprint option and also key option same as touareg key kessy system i pulled out the pincode and CS 7 bytes and tries to program the new key by adding key but again the safe comes out and esl opens close car starts and goes off directly plz help mates how to finailzs the job i did now immo off for allowing the customer to drive his car and he is coming back tomorrow any idea how to finalize the job?

Originally Posted by rob h

Hello Nassreddine84,

If ignition comes on, means you have the correct dealer key.
Not starting means, you still need to program the key with pin.
Check the ammount of Keys!
Check the configuration!

Rob , I would say his key is good and programmed, but Kessy and ECU are not adopted. If key not programmed on this car , Ignition will never come On.

@Nassreddine84
M8 do not get me wrong what I am going to say, but you need to learn lot of things about VAG cars before you start judge VVDI or any other tool.
I Remember one thing from old guy when I stat this long time ago "Tool do not fix cars , People do this".

**amigokola** · 30th January, 2017, 02:03 PM

In this type there is a note in manual that after key programming when you cant start car you must unplug battery for 5 min.

Originally Posted by Nassreddine84

Again with the SAFE msg i got today audi A8 2008 with fingerprint option and also key option same as touareg key kessy system i pulled out the pincode and CS 7 bytes and tries to program the new key by adding key but again the safe comes out and esl opens close car starts and goes off directly plz help mates how to finailzs the job i did now immo off for allowing the customer to drive his car and he is coming back tomorrow any idea how to finalize the job?

**Faraday** · 31st January, 2017, 05:58 PM

I have ibiza 2014 witm MM dash 9s12 I can read immo data, prepare dealer key but I can not add key (by dump or obd) Do you know how to solve this problem? I did golf6 no problem but Ibiza doesn't work.

**Nassreddine84** · 31st January, 2017, 07:58 PM

Originally Posted by yugo45

Rob , I would say his key is good and programmed, but Kessy and ECU are not adopted. If key not programmed on this car , Ignition will never come On.

@Nassreddine84
M8 do not get me wrong what I am going to say, but you need to learn lot of things about VAG cars before you start judge VVDI or any other tool.
I Remember one thing from old guy when I stat this long time ago "Tool do not fix cars , People do this".

Just for feed back mates i started the car and thanks for ur efforts guys sure no one born a master we all need to work hard to learn more and more and no pain no gain good luck