VVDI 2 new tool arrived

[rola1971]

It was a 2002 s40 volvo that worked, this new one is a s60 2005 that won't work in the vvdi2 immo key tool, I'm waiting on them to add the volvo module to my tango and see if it will do it

volvo after 2004 work 100% tested

[iHenry3]

VOLVOS60.rar
Volvo S60

[obeids]

Hi there guys


Does anybody know if the VVDI 2 can do the BMW F30 2015 model? It doesn't use the CAS4. Apparently it has a box called the FEM or the FRM.
Has anybody done it or do you atleast have info if the VVDI 2 can do these?

[PremierD]

Don't think even Tommy Cooper can do FEM units mate ....

[lidons]

It has failures in hitag3 ??
it does not recognize!

[kevfield]

VOLVOS60.rar
Volvo S60

Still same with tango mate i think may be wrong or currupt data ..

Thanks Kev

[iHenry3]

Still same with tango mate i think may be wrong or currupt data ..

Thanks Kev

I read the same info with ar32 and vvdi pro, if corrupt what can I do to repair?

[kevfield]

I read the same info with ar32 and vvdi pro, if corrupt what can I do to repair?

Looking at your file i dont think it can be repaired but if you get good used CEM and read 93c86 you can sync to ecu unit ..

Thanks Kev

[lidons]

It has failures in hitag3 ??
it does not recognize!

Hitag3, works correctly, my error of transponder defect

[dorofteius]

Vvdi key tool does not recognize, at least 50 % off the dump's.
The passtrough tool, did never work.
Bmw tool is a lottery.
On vag it is ok, but not on all.

[paul_12345]

Vvdi key tool does not recognize, at least 50 % off the dump's.
The passtrough tool, did never work.
Bmw tool is a lottery.
On vag it is ok, but not on all.

They should remove the passthrough function from the adverts until its working.

What do you mean with BMW tool being a lottery? if it works for the version its meant to then this is not the tools fault.

Post dumps of whats not working on and what VAG its not working on.

[Faraday]

He just complain and give no proof, this way you can blame any tool.

Just read this he complain then he say it was his fault.

http://www.digital-kaos.co.uk/forums...=1#post2901584

in 30.11.2016 he was begginer now after few weeks he is PRO

As far as I work with VVDI2 all functions that 're on list works.

[dorofteius]

What ? All vvdi2 functions on the list work ?
Are you for real ?
I will be a beginner for life.
But the fact that this tool is not working on allot of things does not make anny beginer or advanced.

And no mate. You are wrong. On that dash, vvdi had no clue what it was. That was the problem.
I used-it on other dash, and it worked perfect, Only that dashboard was a enigma for this tool.

[Faraday]

Do you have problem with reading? I wrote all what I did and was on the list simply works.

It is your problem that you don't even read user manual.

[paul_12345]

What ? All vvdi2 functions on the list work ?
Are you for real ?
I will be a beginner for life.
But the fact that this tool is not working on allot of things does not make anny beginer or advanced.

And no mate. You are wrong. On that dash, vvdi had no clue what it was. That was the problem.
I used-it on other dash, and it worked perfect, Only that dashboard was a enigma for this tool.

a lot of programmers don't identify the cluster type... these tools are made to be a tool for people who know what they are doing, not for people who don't know what they are doing and moan because its not a 1 button process that talks you through the whole procedure.