VVDI 2 new tool arrived

**insomnia2009** · 30th October, 2015, 04:21 PM

interesting there is alot of problems with the new vvdi 2 i had a similar problem with a 1 series and i was only testing the tool and as i have posted before audi rb4 rb8 doesnt work either its not a good sign when fvdi has to bail it out

**Bmkeys** · 30th October, 2015, 04:42 PM

I have been using multitool of nearly 2 years and have never had an issue so I would of though vvdi2 would of been just as stable.

**thebigk** · 30th October, 2015, 04:48 PM

Perhaps its a matter of time to get the bugs out? But I agree BMkeys, I assumed it'd be on the same level as multitool

**Samic** · 2nd November, 2015, 04:24 AM

Originally Posted by Bmkeys

I had a small problem today with a 2005 1 series cas2.
It was just a spare key job, not lost keys.
At first I kept getting security login failed, but after a few attempts I could read key info.
After making the key, I synced cas and ELV no problem, but the car wouldn't start.
I tried to sync the CAS and DME a few times but it didn't work.
In the end I had to disconnect the battery for 5 mins and sync with FVDI, then the car started.

friend,this type need to try several times sync CAS and DME,and re-plug in the key each times then try to start.

**Siham** · 2nd November, 2015, 05:02 AM

Samic many members also in others forum are complaining about vvdi 2 ,many bugs and many functions does not work .
In this way you will be like some of your challengers F.....
Also is not fair to wait customers report to make adjustment on your tool .

**Bmkeys** · 2nd November, 2015, 06:17 AM

Originally Posted by Samic

friend,this type need to try several times sync CAS and DME,and re-plug in the key each times then try to start.

I tried to sync at least 8 times and it didn't work. I have never had this problem with multitool and FVDI managed to sync it first time.

**Samic** · 2nd November, 2015, 07:05 AM

Originally Posted by Bmkeys

I tried to sync at least 8 times and it didn't work. I have never had this problem with multitool and FVDI managed to sync it first time.

mate,send log file PM me/on skype,by the way all you tried in the latest V1.0.8 version,right?(in old version maybe have this problem)

**Bmkeys** · 2nd November, 2015, 07:39 AM

Originally Posted by Samic

mate,send log file PM me/on skype,by the way all you tried in the latest V1.0.8 version,right?(in old version maybe have this problem)

I have the latest version installed.

I will see if I can find the log file.

**labusas** · 2nd November, 2015, 03:06 PM

HI Samic
Please look at the logs for failed BMW 3 series, cas 3+ encrypted. I tried 64 times, I tried with an eeprom file and 64 times, failed to make key. Igntion was ON, keyless worked but no start.

**Maartinj** · 2nd November, 2015, 04:56 PM

Originally Posted by Siham

Samic many members also in others forum are complaining about vvdi 2 ,many bugs and many functions does not work .
.

`

where have you hear this ?
send me link please

**Bmkeys** · 2nd November, 2015, 08:02 PM

I had another issue today.

Attempted to add another key to a 2003 Audi A4.

It pulled the pin code ok, but when I tried to learn 2 keys, the immo light just started flashing really fast and not add any keys.

It would learn 1 key fine, just not 2

I had to use Chinese vag login tool to add both keys.

**thebigk** · 3rd November, 2015, 03:43 AM

Is there a list anywhere for the cars that vvdi2 can program via obd2?

It's confusing to find any confirmation for all the cars this can program. there is even mention of MB IR keys, but not a lot of explanation

**dmp** · 3rd November, 2015, 02:21 PM

Can somebody confirm which Porsche models this tool covers? Is the Porsche section the Cayenne (that used to be included with the VAG) or is it for the 9x6/9x7/9x1??

**labusas** · 3rd November, 2015, 05:44 PM

Originally Posted by dmp

Can somebody confirm which Porsche models this tool covers? Is the Porsche section the Cayenne (that used to be included with the VAG) or is it for the 9x6/9x7/9x1??

Only Cayenne/Touareg

**Maartinj** · 3rd November, 2015, 08:13 PM

Originally Posted by Bmkeys

I had another issue today.

Attempted to add another key to a 2003 Audi A4.

It pulled the pin code ok, but when I tried to learn 2 keys, the immo light just started flashing really fast and not add any keys.

It would learn 1 key fine, just not 2

I had to use Chinese vag login tool to add both keys.

Guys. once again :
If any of YOU discover an issue with some options and want to complain, please post a LOG from that operation which NOT work , it will help to fix it
Every time when you open VVDI/ VVDI2 new LOG is create, so please LOG will contain only a issue.

Thx