VVDI 2 new tool arrived

**barho67** · 3rd March, 2019, 11:14 PM

Originally Posted by jodge

VSS = GND
VDD = VCC
But you will need FLMD1 too. Find with a multimeter

thanks so much! but on the picture dont have FLMD1,are you sure?

**jodge** · 4th March, 2019, 08:31 PM

your pic is UPA pinout and you planning to read with vvdiprog. And the vvdiprog using the FLMD1 pin. Use your multimeter

ren.jpg

**TESTASTRETTA** · 5th March, 2019, 10:27 PM

Hi guys,
I am beginner in that manner. To clone A6 4f EZS with 9s12 is it ok to do it with VVDI prog from china? Or is it to risky? I heard that 9s12 can corrupt even by reading???

**Oras** · 7th March, 2019, 09:03 AM

Originally Posted by TESTASTRETTA

Hi guys,
I am beginner in that manner. To clone A6 4f EZS with 9s12 is it ok to do it with VVDI prog from china? Or is it to risky? I heard that 9s12 can corrupt even by reading???

In my case i reading 5-6 times,no problem with vvdi prog.

**sniegavirs** · 7th March, 2019, 09:16 AM

This thread is for VVDI2 not VVDI Prog!!!!!!!!!!!

https://www.digital-kaos.co.uk/forum...3754-VVDI-PROG

**amigokola** · 8th March, 2019, 05:31 PM

Originally Posted by rob h

Clone id48 or add key to ezs dump.
Or create dealer key, from ezs dump and learn with vcds.

Tell me what I was doing wrong rob ??
I never maneged to succeed learning key with VCDS in Crafter...

Wysłane z mojego SM-G950F przy użyciu Tapatalka

**ghostrider72** · 8th March, 2019, 06:41 PM

With dump you should be able to do it anyway

**amigokola** · 8th March, 2019, 07:51 PM

Originally Posted by ghostrider72

With dump you should be able to do it anyway

I did.. But would like to know. Waited some min after Login and no go...

Wysłane z mojego SM-G950F przy użyciu Tapatalka

**milehighlockdoc** · 9th March, 2019, 09:09 PM

I had a weird situation today
2012 Tiguan AKL
Read partial immo data and none of my VW remote head keys would be precoded with VVDI2, they all said the key had a checksum error and wouldn't learn to the car.
So then I tried just a 48 chip and used a wired Xhorse remote and it did precode the chip and learn to the car but then the remote wouldn't program. I had to program the remote with the AutoProPad for full key functionality.

Sent from my SM-N960U using Tapatalk

**jodge** · 9th March, 2019, 09:22 PM

Originally Posted by milehighlockdoc

I had a weird situation today
2012 Tiguan AKL
Read partial immo data and none of my VW remote head keys would be precoded with VVDI2, they all said the key had a checksum error and wouldn't learn to the car.
So then I tried just a 48 chip and used a wired Xhorse remote and it did precode the chip and learn to the car but then the remote wouldn't program. I had to program the remote with the AutoProPad for full key functionality.

Sent from my SM-N960U using Tapatalk

i had the same with T5. i broke down the tp antenna and replaced with a simple glass id48.

**camouflaged** · 12th March, 2019, 09:53 AM

Hi, is there any tool supporting new BMW G-series cars with BDC2 ? - shall buy VVDI2 and hope, maybe in future it will be compatible with BDC2?

**MVVL** · 13th March, 2019, 11:53 AM

Hey. Who can explain. If I buy the basic version http://www.fvdiobd.com/xhorse-vvdi2-...-function.html, can I then open the remaining authorizations as needed?

**rola1971** · 13th March, 2019, 02:01 PM

Originally Posted by MVVL

Hey. Who can explain. If I buy the basic version http://www.fvdiobd.com/xhorse-vvdi2-...-function.html, can I then open the remaining authorizations as needed?

tray where you buy this unit