VVDI 2 new tool arrived

[Staafonline]

just trying something out here with a friends car as a little project and playing around with the vvdi and i'm trying to read a gallardo from late 2006 with it, but cant establish proper connection. Vvdi uses pin 7 for kline diagnostics but i have read that lamborghini uses pin 13 for kline to read modules, vvdi only has option kline-pin 3,7 and 15 i believe, are any of these options good? i dont want it to throw faultcodes on me that i cant erase hahaha. i have seen adapter cables for it also that switches kline, has anybody dealt with this before?

[jodge]

just trying something out here with a friends car as a little project and playing around with the vvdi and i'm trying to read a gallardo from late 2006 with it, but cant establish proper connection. Vvdi uses pin 7 for kline diagnostics but i have read that lamborghini uses pin 13 for kline to read modules, vvdi only has option kline-pin 3,7 and 15 i believe, are any of these options good? i dont want it to throw faultcodes on me that i cant erase hahaha. i have seen adapter cables for it also that switches kline, has anybody dealt with this before?

why do you want to "play a gallardo"? even a 13 years old.. try it with a polo, golf..etc first they are also kline cars.

[Staafonline]

why do you want to "play a gallardo"? even a 13 years old.. try it with a polo, golf..etc first they are also kline cars.

like i said its a project to get it to work. polo, golf and other kline cars already work, but this somehow doesn't. so i want to find out. thats why i want to "play with gallardo" and see if it will work or not.
thats why we are here on the forum no?

[pepi]

You better read 24c08 on the bench as a backup then play with it.

Sent from my SM-G975F using Tapatalk

[qeso705]

When its rb8 then forget. 2013 was on standard k-line pinout but there are several dashes type which differ in access type.

[Jimmy07]

2009 BMW 1 series AKL

I just bought VVDI2 and this is first job for it so please go easy 😬

I assume this should be CAS3 if not had software upgrade.

Not being lazy have researched and read manual. Loads of info for adding key but limited AKL.

Is procedure as follows:

Select BMW
Key learn
CAS key learn
Auto detect
Connect
Get key info
Insert key in ignition
Lost all key
Select

Is this right so far ?

What’s next ?

Thanks in advance 👍🏻👍🏻😊

[u.s]

It said can take up to 2 hours, I waited for just over 2 hours and it didn't work.

Ok so tested this twice with vvdi2 and didn't work.
In the end took clocks out stripped it down and did 95320 with the digiprog3

[hojo25]

What has improved at VVDI2 with the new update at BMW ???
CAS 4 should be read via OBD !!!
VVDI2 should first read CAS3 + encryption correctly !!!
And VVDI2 should work the software down properly at CAS3 +. Here is copied only by BMW Explorer stuff without 100% kentnisse. CAS3 + is still error that the type is not supported and that does not work even with OBD.

[jokir]

Hi
I read immodata from ECU EDC16U31
The MAC2 address was calculated incorrectly
Do you have similar experience?

Today confirmed incorrect calculation of MAC2 on the other two eeproms
Version sw6.6.1
Thanks

[u.s]

Can we use vvdi2 bmw to change VIN in ECU and CAS on a BMW E90?

[Staafonline]

When its rb8 then forget. 2013 was on standard k-line pinout but there are several dashes type which differ in access type.

yeah there are mixed answers all over the internet about this dash and I dont want to mess with it to much, just able to read it diagnostically with vvdi so no key learning or that kind of stuff
at this point just reading the DTC's from the various modules onboard would be enough.
some say pin 13 is used for reading some say pin 15 is used for kline reading, there isn't a straight answer for this.
gallardo spyder2.jpg
maybe someone could tell me from this picture

[yugo45]

Hi
I read immodata from ECU EDC16U31
The MAC2 address was calculated incorrectly
Do you have similar experience?

Today confirmed incorrect calculation of MAC2 on the other two eeproms
Version sw6.6.1
Thanks

What year and is it Immo 3 or 4 ?

[immoneard]

yeah there are mixed answers all over the internet about this dash and I dont want to mess with it to much, just able to read it diagnostically with vvdi so no key learning or that kind of stuff
at this point just reading the DTC's from the various modules onboard would be enough.
some say pin 13 is used for reading some say pin 15 is used for kline reading, there isn't a straight answer for this.
gallardo spyder2.jpg
maybe someone could tell me from this picture

Gallardo use same pin out as Audi A4 rb4/8 , K-Line is Pin 23 at green connector . If you connect Diagnostic and able to read DTC , then you good.

[barho67]

hi,i have mini r56 AKL ,so i need to make key,i need onlie cas for make key buy dump? or i need ecu also? this car have cas3/cas3+,how to make key for it pleas? because i did talk witk one men he says i need ecu for isn number are its try? this first time i make AKL on cas3+,how to now if cas is encrypted?

[Diablotic]

You need ISN number from engine ecu.