VVDI 2 new tool arrived

[super jumbe]

Any way to clone mqb id48 remote key?


With Tapatalk

You can not clone MQB 48 but with a bit of knowleged you can easy programme with handybaby 2.

[robinbga]

The new version V6.6.6 is doesn't include all I expected to be fixed like MED9 & 17 immo transfer/clone, off, nothing works.
It's like these Chinese tools need to be rubbished for something else, they can't be trusted for commercial use.
Bad company, they don't care at all even after writing several messages to their support team...


https://public-ap-southeast-1-125105...tallerV666.exe


Kess V2 . K-Tag
MiniPro . UPA . VVDI2

[milehighlockdoc]

Version 6.6.6 has a bug with cloning out with the superchip on Land Rover Range Rover Sport CEM with a dump read with VVDI Prog.

[PerryZhang]

Version 6.6.6 has a bug with cloning out with the superchip on Land Rover Range Rover Sport CEM with a dump read with VVDI Prog.

what is the bug , can you add this skype : xxxxxxxxxxxxxx and show some photos ,

[milehighlockdoc]

My pleasure.
When inserting the super chip and choosing to clone out from an already used position, it detects the superchip, sets the superchip, and then says chip is not pcf7936. I tried blank superchip, generated pcf7936 superchip and reset superchip. I was able to use actual pcf7936 in used position (and choose not to use superchip, just pcf7936) and then write new dump with VVDI Prog to finish the job.

I actually had the same exact error with cloning out 98-2003 Saab onto a superchip and the immobilizer data tool with 6.6.5 (maybe 6.6.1) but that does now work with 6.6.6

[Weasel3]

My pleasure.
When inserting the super chip and choosing to clone out from an already used position, it detects the superchip, sets the superchip, and then says chip is not pcf7936. I tried blank superchip, generated pcf7936 superchip and reset superchip. I was able to use actual pcf7936 in used position (and choose not to use superchip, just pcf7936) and then write new dump with VVDI Prog to finish the job.

I actually had the same exact error with cloning out 98-2003 Saab onto a superchip and the immobilizer data tool with 6.6.5 (maybe 6.6.1) but that does now work with 6.6.6

The only chip I know is good for Saab is TK5561 because of the strong signal. Standard T5 is to weak. Is the signal on the VVDI superchip so strong that it can handle the SAAB? Did you test placing the chip in front of the coil ring.

[Jimmy07]

2005 Audi A3 AKL

Anyone have any problems with these ?

Done 2 today both 2005 first one programmed no problem with VVDI2 ( OBD )

Next one got pin code and CS with Supervag as VVDI2 wouldn’t read codes and entered codes manually but VVDI2 wouldn’t program transponder ?

[castin]

Jimmy07, meybee dash fujitsu? Try use carprog for read CS and prepare key. Im try on table and now key prepare by carprog is correct - dash see new key as DEALER.

[auto techniek]

Do you mean carprog is good to read and program keys in fujitsu cluster?

Jimmy07, meybee dash fujitsu? Try use carprog for read CS and prepare key. Im try on table and now key prepare by carprog is correct - dash see new key as
DEALER.

[Jimmy07]

I had pin and CS code that was pulled with Supervag. VVDI2 connected to ECU and instruments ok but wouldn’t make dealer key. Wasn’t transponder as tried 3

If Fujitsu cluster does it have to be done on bench ?

[castin]

Yes, i hawe this dash for test and read immo data on bench, only use gateway, no need wakeup.
VVDI2 read pin and 6 bythe CS from ECU, but can't read immo data from dash.

[sdnatlst]

Why does vvdi2 transponder maker on any aygo or 107 dump only allow to select position key 1

On any dump?

This does not work after write new dump to immo

[milehighlockdoc]

The only chip I know is good for Saab is TK5561 because of the strong signal. Standard T5 is to weak. Is the signal on the VVDI superchip so strong that it can handle the SAAB? Did you test placing the chip in front of the coil ring.

The SuperChip worked great for me cloning out of a twice module on a 1999 Saab 9-3.

[gokart]

Immobilizer data tool v6.6.6 throws error "unknown version!" if I try to write PCF7935 under Mercedes ML - EAM. VVDI recognized the dump correctly. The problem occurred after I had chosen between super chip and PCF7935.

[eliaselias]

Immobilizer data tool v6.6.6 throws error "unknown version!" if I try to write PCF7935 under Mercedes ML - EAM. VVDI recognized the dump correctly. The problem occurred after I had chosen between super chip and PCF7935.

it will not work for mL
do not waste time