I did key with transponder pcf7935 it’s easy but I need keyless function to work. That’s why I need to renew key which is contained pcf7943as. And also need to change Vin. But the problem is Elv. Any solution except buying new parts?
I did key with transponder pcf7935 it’s easy but I need keyless function to work. That’s why I need to renew key which is contained pcf7943as. And also need to change Vin. But the problem is Elv. Any solution except buying new parts?
VVDi2 FEM test
For the test 1 FEM concerned everything went well with the VVDI2 and VVDi Prog.
Have now got 2 more FEM to adjust and proceeded exactly to VVDI 2 and does not work. It comes to errors after Step 4. Other FEM just like that.
VVDI2 test with BMW fails here everything.
VVDI2 support answers after 5 days !!!
VVDI2 could improve a lot with the help of the users and Live Support Team Viewer.
I do not want to spoil VVDI2 but I want to improve it.
And that is only possible if you as a customer writes the problems.
But from vvdi2 there are no updates to BMW CAS3 + and FEM works only conditionally.
I am looking for VVDI 2 support to test FEM and CAS3 + !!!
Team Viewer available !!!
ThanksFEM fail.jpg
Last edited by hojo25; 23rd March, 2019 at 10:42 AM.
how u use it with fem platform or via obd on car?
FILE SERVICE
REMAP+ dpf-egr-vsa-scr-lambda...cars/buses/agricultureGenuine WinOLS user
I use a test cable and work it at home.
I can read keys.
I read the encoding
With VVDI XPROG, I read EEprom.
With VVDI2 the EEprom is edited and I play it again.
The programming also works everything.
After the original EEprom is played and you execute step 4, the error comes with the hex.
IMG_4768.JPG
Last edited by hojo25; 24th March, 2019 at 11:42 AM.
hi,can somebody give me link to download last version vvdi2? i did reinstall windows
how page1 of TRPWS21 should be prepared for obd programming of toyota rav4 2016 H chip ?
So FEM can now be read and edited with VVDI2. The whole thing was not because the data was too new. Then I downgraded both FEM with ESYS and again tested the whole thing with VVDI2.
And now you can edit it.
Problem is now only with the start / stop simulation button, the green LED briefly but then off again. The key is also recognized by VVDI2 but no ignition terminal 15 is released.
bmw-fem-bdc-test-platform-sk228-d-3.jpg
Today VVDI2 disappointed me again! Customer came to me with CAS3 unit with 2 keys. 1 OEM and 1 china that I programmed to that car 2 years ago with VVDI2. Now he has swapped different engine with its own CAS system so this CAS he brought is not needed anymore so he wanted to unlock the old CAS unit keys so we could program them to new cas. I said NO PROBLEM it should be 10min job to unlock them. So tried it with KeyInfoFile method, it starts triyng with each key slot and when it gets to actual keys slot it shows error - Can't detect transponder.... I thought some glitch maybe and tried with other key! Same error... Then i read eeprom from CAS with VVDI Prog and tried to unlock keys with CAS3+ EEPROM method! SAME ERROR!!!!! What the hell..............?????
Last edited by sniegavirs; 26th March, 2019 at 09:26 AM.
You need CS and Pin for this or just load Kessy eeprom file , then use Unlock 7946 in Key program menu for A8, Touareg . I have done it many times. After that if is remote key you need to write Remote bytes in Key transponder menu. I never try 7943 but it does not hurt to try.
Or you can get new chip and change it.
Last edited by yugo45; 27th March, 2019 at 04:15 PM.
Bookmarks