VVDI 2 new tool arrived

[SAMDoctor]

Done as a 2016-2017 Edge, using the smart key even if it was a regular flip key.

[sniegavirs]

Done as a 2016-2017 Edge, using the smart key even if it was a regular flip key.

This is VVDI2 tread that has nothing to do with VVDI Key Tool Plus!!!!!

[ASCM]

Hi why xhorse not add working hours reset and isn data repair for cas in its device *vvdi 2*sw throught dump or on bench

Sent from my SM-A125F using Tapatalk

[Perryking]

Sorry not this thread

[nyandacca]

2015 mini cooper , downgrade cas 3++ista to add key then no key can start the vehicle only remote works , no ignition on .

we could not save the ori file , because the dash was hell to remove , we did remove the dash and save the now damage files and tried many flash file but still nothing .

so we sent it to dealer 800usd later the car was updated and now work .

so to do a mini cas3++ista is a no no for sure .

cj

send broken files to EULOLABPRO.COM
they send back repaired files in 10 minutes.

then CAS-DME sync via VVDI2, and job done.

[autoTkey]

Failed on an EEPROM/OBD2 work of Volvo CEM1 R5F64525 S60 2016 NON-keyless.
VVDI2 locked the new key but it didn't work on the car. VVDI PROG failed to write the newly generated EEPROM dump (fails on erasing at the beginning of 0x2000 address).
VVDI OBD MINI has no option to use the already extracted backup of the CEM. It can only use timed access which fails on this car - at the end it says login failed (seems like it can't crack the login).
So close to complete it but with so many little misfortunes it was a total fail in the end. Xhorse should be ashamed because they didn't add that little extra effort to make this a complete solution with options to choose from... They only did copy&paste from others but they chose the non-working solutions...
Disappointing.

[urshul]

Volkswagen Jetta 04/2019 USA couldn't add a key with VVDI2. Autodetect KOMBI 17A920840A version 252 2700 type MQB-NEC35xx
When reading eeprom appears a window: *The current dashboard is not the selected type!*
The key is MQB48
Connected VAG OBD Helper, he also identified type MB-NEC35xx (however, the service does not work and asks to try in 24 hours)
Why does VVDI 2 not work with this type of dashboard ?

I found the answer to my question
http://blog.xhorsevvdi.com/how-to-fi...at-ateca-2018/

How can I get immo data without OBD Helper?

[autoTkey]

This probably is not a MQB, but a regular ID48 modified to work as ID88. That's why it shows MQB 48.
PQ platform.
Try to select regular dash, without MQB in the name.

[lion0304]

Yesteday after update my VVDI2 to full because i need program CAS4+ key from dump, i can see all function actived.

After trying BMW OBD function, it show me need install VVDI2 configuration file V1.0.0. So i did.

Today open BMW dump tool, all CAS4/ FEM/ BDC disapear from menu, it stay as basic version.

Could someone know how to restore this?

Thanks

[u.s]

CAS4/FEM/BDC functions in BMW app of vvdi2, not transponder programmer app

[ASCM]

Hi does the vvdi 2 support latest ilevel for fem bdc key programming and how safe its to use it to latest ilevel ?

Sent from my SM-A125F using Tapatalk

[lion0304]

CAS4/FEM/BDC functions in BMW app of vvdi2, not transponder programmer app

Thank you, yes i see that. My mistake when using new software.

[Faraday]

I have hudge problem with update my vvdi2 after install 7.1.5 I can not update firmware Upgrade kit 1.7.6 does not recognize my vvdi2 it hang on reading device info

[autoTkey]

Arrange returning for repair with the dealer who sold it to you.

[musti418]

[QUOTE=Faraday;