VVDI 2 new tool arrived

**Chuckk** · 17th December, 2018, 02:33 AM

Originally Posted by rob h

I dont think that adding by dump works on these.
Loading off the eeprom dump, will tell us more.

Sorry for the delay rob, support says they can't do it. But here is the dump so you can see.

**Maartinj** · 17th December, 2018, 04:10 AM

Originally Posted by Anass GM

i can buy the vvdi2 without PSA

sure you can,. but why you dont want PSA ?
PSA is give free

**autoTkey** · 17th December, 2018, 05:44 AM

Unfortunately PSA module can't be used to add a key for older models even if you have the PIN already. That's a pity.
It only supports UDS (maybe). There's not even a single word about this module in the PDFs - what it can do and what it supports.
I wouldn't count on it for any car.

**u.s** · 17th December, 2018, 09:50 AM

(VT-01) Prepare Toyota H Chip Authorization free for VVDI2 Full owners.

http://blog.vvdishop.com/enable-toyo...-xhorse-vvdi2/

**Maartinj** · 17th December, 2018, 10:24 AM

Originally Posted by u.s

(VT-01) Prepare Toyota H Chip Authorization free for VVDI2 Full owners.

http://blog.vvdishop.com/enable-toyo...-xhorse-vvdi2/

Ha ha ha
They are very slow
That manual I made in November

They even keep my device s/n
Next time I will do a one with PL language just to see if thy copy them too

**u.s** · 17th December, 2018, 10:32 AM

couldn't see the info posted (i might have missed it tho ? ) so thought would share.

**digitalol** · 17th December, 2018, 07:33 PM

i see now fem and id48 copy free? I can buy vvdi2 full with bmw fem here - will i get copy id48 free also?

**ravate** · 17th December, 2018, 09:30 PM

Hi house I need help
Vw toureg 2004
Owner damage original ecu with water
And is pay new one from dealer.
AMD I contact me .
Today I recive the car .
I tray spwap eeprom no sucess
I tray read by vvdi2 the eeprom dump is acept I use immo off funcion from software vvdi2.al so no sucess
I tray adaptation is giv error.
Pliz any expert to help me how to solve.
8v. Benzin
Pliz if sum one can help I tanks alot

Enviado de meu SM-G935F usando o Tapatalk

**Maartinj** · 18th December, 2018, 06:13 AM

If you have Messsge "Can not get module challenge - means - ECU not support automatic adaptation and must be adapt via PIN/SCK
If you swap epp from old ECU to new ECU , you simple fuc** it up .
Simple swap IMMO data in new EPP compare with old one , not whole EPP

**u.s** · 18th December, 2018, 07:53 AM

Originally Posted by digitalol

i see now fem and id48 copy free? I can buy vvdi2 full with bmw fem here - will i get copy id48 free also?

That seems to be a promotion available now when buying VVDI2 full, you can get either the BMW FEM function free or the copy id48 function free, not both at the same time.
In addition to this, some sellers are also offering the new vag obd helper tool free.

**Maartinj** · 18th December, 2018, 09:33 AM

Originally Posted by u.s

That seems to be a promotion available now when buying VVDI2 full, you can get either the BMW FEM function free or the copy id48 function free, not both at the same time.
In addition to this, some sellers are also offering the new vag obd helper tool free.

yes, depend of country, seller , different promotion
VAG obd helper already start collecting feedback on DK forum

**sniegavirs** · 18th December, 2018, 10:07 AM

Originally Posted by ravate

Hi house I need help
Vw toureg 2004
Owner damage original ecu with water
And is pay new one from dealer.
AMD I contact me .
Today I recive the car .
I tray spwap eeprom no sucess
I tray read by vvdi2 the eeprom dump is acept I use immo off funcion from software vvdi2.al so no sucess
I tray adaptation is giv error.
Pliz any expert to help me how to solve.
8v. Benzin
Pliz if sum one can help I tanks alot

Enviado de meu SM-G935F usando o Tapatalk

VVDI2 Immo off solution for ME7.1.1 is sh*t. try other solutions.