Im read this device with UPA programmer without problem. You need download from Google one datasheet.PDF for this device and verify you pin out to read the chip. Pin 25 BKGD Pin 54 Reset. and need find source pins. 8 Mhz config .
Im read this device with UPA programmer without problem. You need download from Google one datasheet.PDF for this device and verify you pin out to read the chip. Pin 25 BKGD Pin 54 Reset. and need find source pins. 8 Mhz config .
Thanks sergei5005 but now I have another problem
the reading could do but read all the time like changes with every reading I happened
Its FORD ranger BCM o what???
u can use upa
Yes with upa will work but ingeresting is did some one get to read it with xprog box 5.48 cause will be helpfull for all people here .
Chiptuning/DPP/EGR/LAMBDA(O2)/FLAPS/Adblue/DTC OFF / EDC17 Immo OFF
Kess v2 eu. clone full/Ktag eu. Clone 6.070 full
Info on pm
Kess v2 ori , K-tag ori, MAGPro2 x17, Galleto v54 EU ,Winols ,AVDI full ori, Orange 5 /Omega /Xprog/Upa all ori , VAS Pc , Porsche PIWIS 2 and etc........
Did read with Xprog 5.5.1 but it's Valeo BSI.
Hello, i have same issue than chacarita, when i read MCU always i have different dump reading.
How did you solved it?
Thanks
Try lift reset pin and read .
rtbdiagnostic (12th April, 2021)
I just read a ford ranger bcm, xprogm5.5.5 reads different each time, upa and vvdiprog always read the same.
[SIGPIC][/SIGPIC]
Bookmarks