Remote programming Daf 106 XF-CF Euro6 2012-2019

[rob h]

Hello guys,

There is a seperate id48 transponder in these keys.
The remote, how do we match these?

Only Davie, or is there a manual solution?


Daf 106 XF-CF Euro6 2012-2019

Thanks

[crouchinggerbil]

1. Try this
   
   Access Programming Mode: Insert one of the existing working keys into the ignition and turn it to the "On" position (not start). Wait for about 5 seconds, then turn it back to the "Off" position. Repeat this step a total of three times, ending with the key in the "Off" position.
2. Programming Mode: Within 5 seconds of completing step 1, remove the key from the ignition and insert the new key you want to program. Turn it to the "On" position within 10 seconds. This should initiate the programming mode.
3. Programming Confirmation: After about 10 seconds, you should hear a confirmation chime, which indicates that the new key has been successfully programmed.
4. Additional Keys: If you have more keys to program, repeat steps 2 and 3 for each additional key, making sure to complete the process within the allotted time.
5. Exit Programming Mode: Once you have programmed all the keys, turn the ignition to the "Off" position, and then remove the key. Test each programmed key to ensure they work as expected.