***** FVDI Technical Support *****
Register
Page 1 of 160 1234561151101 ... LastLast
Results 1 to 15 of 2396
  1. #1
    DK Veteran
    Saulius Saulius's Avatar
    Join Date
    Aug 2010
    Location
    Herts, UK
    Posts
    604
    Thanks
    61
    Thanked 182 Times in 70 Posts
    Downloads
    109
    Uploads
    5

    Default ***** FVDI Technical Support *****

    First thing which one need to be fixed:

    http://www.digital-kaos.co.uk/forums...one-km-373755/
    MagicMotorsport X17, FLEX original set, 2wd Dynomet Dyno Road, Ori WinOls.
    We offer: Tuning / DPF / EGR / Flaps / Throttle / Ad Blue / Lambda / DTC, IMMO off. Also EDC17 IMMO off BY EEPROM with no faults on a dash!

  2. The Following User Says Thank You to Saulius Saulius For This Useful Post:

    ahmedadel (31st December, 2015)

  3. #2
    DK Veteran
    Join Date
    Jan 2011
    Posts
    673
    Thanks
    219
    Thanked 82 Times in 63 Posts
    Downloads
    68
    Uploads
    0

    Default

    sprinter 2007 esl steering lock did not read true kline so far tool is a disaster

  4. The Following 2 Users Say Thank You to insomnia2009 For This Useful Post:

    ahmedadel (31st December, 2015),Rodolph (26th February, 2019)

  5. #3
    DK Veteran
    autocheck's Avatar
    Join Date
    Feb 2014
    Location
    Zimbabwe
    Posts
    444
    Thanks
    104
    Thanked 47 Times in 33 Posts
    Downloads
    9
    Uploads
    0

    Default

    i have a fdvi ID F01114 with Mazda /Ford V4.9+Tag V6.1+H&K V2.1 but the special function for programming keys , injector and adopting new units is not working , it only saying failed


  6. The Following 2 Users Say Thank You to autocheck For This Useful Post:

    ahmedadel (31st December, 2015),Rodolph (26th February, 2019)

  7. #4
    DK Veteran
    Maartinj's Avatar
    Join Date
    Nov 2010
    Location
    Poland
    Posts
    1,866
    Thanks
    184
    Thanked 1,309 Times in 688 Posts
    Downloads
    2
    Uploads
    0

    Default

    ECU adaptation doesnt work (EDC16, did not try EDC17 but gues also fail) . Work few time when one of tech support was online. Now - doesnt
    v21 - when Micronas cluster read - show " No millage in DSG module" , must use V18 to read Micronas cluster
    Immo 5th - missing licence

  8. The Following 2 Users Say Thank You to Maartinj For This Useful Post:

    ahmedadel (31st December, 2015),Dani375 (3rd December, 2018)

  9. #5
    DK Veteran smayer's Avatar
    Join Date
    Jan 2012
    Posts
    2,113
    Thanks
    191
    Thanked 484 Times in 340 Posts
    Downloads
    4
    Uploads
    0

    Default

    fvdi F08144, just work in some bmw, don?t have any comunication with any other cars.

    Why can expect answer here and don?t have in skype? Maybe DK it?s not the best place to fly technical support (just my opinion) if this company whant help clients have to many ways.

  10. The Following 2 Users Say Thank You to smayer For This Useful Post:

    ahmedadel (31st December, 2015),bocaje (4th December, 2016)

  11. #6
    DK Veteran
    Maartinj's Avatar
    Join Date
    Nov 2010
    Location
    Poland
    Posts
    1,866
    Thanks
    184
    Thanked 1,309 Times in 688 Posts
    Downloads
    2
    Uploads
    0

    Default

    I am sure lot of you guys contact FLY directly and complaind issue. Who get back any feedback from FLy ? GWEE - thank you for your time, but to be honest - if FLY dont want to listen each customer...... you think they will listen 10000 of problems from you ? What is a different ?

  12. The Following User Says Thank You to Maartinj For This Useful Post:

    ahmedadel (31st December, 2015)

  13. #7
    Member
    zhumerchant's Avatar
    Join Date
    Apr 2010
    Posts
    83
    Thanks
    4
    Thanked 74 Times in 44 Posts
    Downloads
    1
    Uploads
    0

    Default

    Quote Originally Posted by insomnia2009 View Post
    sprinter 2007 esl steering lock did not read true kline so far tool is a disaster
    Thanks for using FVDI.
    Please send log files to us. Log file path: My documents\ABRITES software for ID 17118A\Mercedes.

  14. The Following User Says Thank You to zhumerchant For This Useful Post:

    ahmedadel (31st December, 2015)

  15. #8
    Member
    zhumerchant's Avatar
    Join Date
    Apr 2010
    Posts
    83
    Thanks
    4
    Thanked 74 Times in 44 Posts
    Downloads
    1
    Uploads
    0

    Default

    Quote Originally Posted by Maartinj View Post
    ECU adaptation doesnt work (EDC16, did not try EDC17 but gues also fail) . Work few time when one of tech support was online. Now - doesnt
    v21 - when Micronas cluster read - show " No millage in DSG module" , must use V18 to read Micronas cluster
    Immo 5th - missing licence
    Thanks for using FVDI.
    For EDC16 adpatation, internet connection is necessary. But now something error with FLY server, so adaptation will temporarily not work for about one month.
    For V21, this version is better than V18 at "MED17 read/write by boot mode" function. For the other functions, V18 is prefered.

  16. The Following User Says Thank You to zhumerchant For This Useful Post:

    ahmedadel (31st December, 2015)

  17. #9
    Member
    zhumerchant's Avatar
    Join Date
    Apr 2010
    Posts
    83
    Thanks
    4
    Thanked 74 Times in 44 Posts
    Downloads
    1
    Uploads
    0

    Default

    Quote Originally Posted by autocheck View Post
    i have a fdvi ID F01114 with Mazda /Ford V4.9+Tag V6.1+H&K V2.1 but the special function for programming keys , injector and adopting new units is not working , it only saying failed
    Thanks for using FVDI.
    These bugs is caused by original AVDI. For original AVDI has many bugs at Ford/Mazda commander.

  18. The Following User Says Thank You to zhumerchant For This Useful Post:

    ahmedadel (31st December, 2015)

  19. #10
    Banned
    Join Date
    Oct 2009
    Posts
    1,196
    Thanks
    242
    Thanked 123 Times in 105 Posts
    Downloads
    19
    Uploads
    0

    Default

    Quote Originally Posted by zhumerchant View Post
    Thanks for using FVDI.
    These bugs is caused by original AVDI. For original AVDI has many bugs at Ford/Mazda commander.
    one question why you then clone the original avdi sw when it is full of bugs, why you not make your own sw which is much more better and 100% working.

  20. The Following User Says Thank You to chriskross For This Useful Post:

    ahmedadel (31st December, 2015)

  21. #11
    DK Veteran
    autocheck's Avatar
    Join Date
    Feb 2014
    Location
    Zimbabwe
    Posts
    444
    Thanks
    104
    Thanked 47 Times in 33 Posts
    Downloads
    9
    Uploads
    0

    Default

    Quote Originally Posted by zhumerchant View Post
    Thanks for using FVDI.
    These bugs is caused by original AVDI. For original AVDI has many bugs at Ford/Mazda commander.
    WHERE CAN I GET THE J1850 ADAPTER FOR EARLIER MODELS ?

  22. The Following 2 Users Say Thank You to autocheck For This Useful Post:

    ahmedadel (31st December, 2015),Jobeso66 (11th October, 2017)

  23. #12
    DK Veteran

    Join Date
    Dec 2008
    Posts
    702
    Thanks
    412
    Thanked 169 Times in 122 Posts
    Downloads
    71
    Uploads
    0

    Default

    Quote Originally Posted by zhumerchant View Post
    Thanks for using FVDI.
    For EDC16 adpatation, internet connection is necessary. But now something error with FLY server, so adaptation will temporarily not work for about one month.
    For V21, this version is better than V18 at "MED17 read/write by boot mode" function. For the other functions, V18 is prefered.
    so what is user supposed to do in this situation? keep changing software/firmware?
    can you take the bits that do work well in v21 and v18 and package them together?

  24. The Following User Says Thank You to u.s For This Useful Post:

    ahmedadel (31st December, 2015)

  25. #13
    DK Veteran
    Maartinj's Avatar
    Join Date
    Nov 2010
    Location
    Poland
    Posts
    1,866
    Thanks
    184
    Thanked 1,309 Times in 688 Posts
    Downloads
    2
    Uploads
    0

    Default

    Friend of my use V21 long time . Last time he decide to send for HW change to work with SW 3in1. Due to hollidays and less customers, it was a right time.
    No everybody have time to send back device and stay w/o it for a 2 weeks

  26. The Following User Says Thank You to Maartinj For This Useful Post:

    ahmedadel (31st December, 2015)

  27. #14
    DK Veteran
    micromax's Avatar
    Join Date
    Dec 2009
    Location
    South Poland
    Posts
    633
    Thanks
    97
    Thanked 326 Times in 164 Posts
    Downloads
    38
    Uploads
    0

    Default

    i have vag v18, not work online CS calc from edc17 dump.

  28. The Following 2 Users Say Thank You to micromax For This Useful Post:

    ahmedadel (31st December, 2015),TESTASTRETTA (28th March, 2019)

  29. #15
    DK Veteran
    Siham's Avatar
    Join Date
    Jul 2014
    Posts
    838
    Thanks
    1,004
    Thanked 564 Times in 327 Posts
    Downloads
    67
    Uploads
    0

    Default

    Hi Members of Dk ,

    I'am a newbie on this forum and would like to take the oportunity to ask fly enginner WHY Avdi clone for VAG when you try to read bcm it corrupt it?and same of peugeot bsi?
    I was a owner off fvdi but puted me in lot of prob with customer and finally decideded to burn it.

    Kindly

    Siham

  30. The Following User Says Thank You to Siham For This Useful Post:

    ahmedadel (31st December, 2015)

 

 
Page 1 of 160 1234561151101 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •