***** FVDI Technical Support *****

[xipsilon]

well I do not think it is possible to do it with fvdi, only avdi and maybe vcp original, with prepared eeprom file in boot mode

[fabianlm]

Hello, everyone ! I need some help or information. I have FVDI 2015, and I read on forum that it can program keys on Golf 5. I tried on a 2006 Golf 5, to program a new key. I select special function = Key learning "standard mode", it read pin and immo data, and after adaptation finished, it asks to put ignition on with each key, but nothing is happening. I tried wizard mode, read pincode, immo data, and "adaptation finished", but it delete also the original key (0 keys, after procedure). Again learning keys- wizard mode, only 1 key, it asks to put ignition on, and the key is programmed. I worked with v24.0. I had the same problem on VW Passat B6.
Where is wrong ? When I tried to program 2 keys, it deletes all of them. Should I try v18.0 ? Or another solution?
Thanks in advance !

[km666]

Hi All,

I have problem with FVDI2015.
Volvo V50 2009 year,DDP,PDM,CEM,DIM communication... error.
Is there a solution to the problem?

Regards,

[TESTASTRETTA]

Hello was somebody succesfull to do dealer key and learn pasat b6 with fvdi2018?

[bresto100]

Hello was somebody succesfull to do dealer key and learn pasat b6 with fvdi2018?

Yes.


Odoslané z môjho iPhone cez Tapatalk

[TESTASTRETTA]

Was it id46 keyless? Or just normal id48?

[kkdigger]

Hello

ECU Replaced on Suzuki Swift 2012 need to reprogram the ecu and do not have the old one. Any chance we can do it using Fvdi ?

[fgabo76]

Hi!
Due to my fvdi 2014 and my problem: connection failure: the interface is not calibrated
Can you help with that?
Thanks!

[trinicolin]

Hello

ECU Replaced on Suzuki Swift 2012 need to reprogram the ecu and do not have the old one. Any chance we can do it using Fvdi ?

Read tricore and programme new key from dump. All will be well.

Sent from my SM-G930F using Tapatalk

[Smallblock454]

If you can't get software updates or if your coutdown time is running out, turn down your routers firewall completely. Did work for me. Software updates are working now and Connecting to server works immediately.

Only question i have: Do i need an internet connection while using Abritus? Because i don't have internet in my garage. And every time i try to use the diagnostic tool it crashes.

[xyz001]

dead-2.jpgit is true?

[DaBotta]

Hello, everyone ! I need some help or information. I have FVDI 2015, and I read on forum that it can program keys on Golf 5. I tried on a 2006 Golf 5, to program a new key. I select special function = Key learning "standard mode", it read pin and immo data, and after adaptation finished, it asks to put ignition on with each key, but nothing is happening. I tried wizard mode, read pincode, immo data, and "adaptation finished", but it delete also the original key (0 keys, after procedure). Again learning keys- wizard mode, only 1 key, it asks to put ignition on, and the key is programmed. I worked with v24.0. I had the same problem on VW Passat B6.
Where is wrong ? When I tried to program 2 keys, it deletes all of them. Should I try v18.0 ? Or another solution?
Thanks in advance !

You are making it wrong.

Search YouTube you will find many many videos.

Worked for me even for Passat even for Golf MK5

[kkdigger]

Thanks for the reply buddy but I am new any where I can find info on how to do that ?

[kkdigger]

Read tricore and programme new key from dump. All will be well.

Sent from my SM-G930F using Tapatalk

Thanks for the reply buddy but I am new any where I can find info on how to do that ?

[trinicolin]

Thanks for the reply buddy but I am new any where I can find info on how to do that ?

Read Tricore with KTAG or similar programmer. Would get immo data from eeprom within the tricore. Put eeprom file in key programmer and make key.

Sent from my SM-G930F using Tapatalk