To all, be careful
FVDI 2015, 2016, 2018, 2019 and fvdi 2 all are online version.
They always were blocked anytime by STIC company zhu engineer.
To all, be careful
FVDI 2015, 2016, 2018, 2019 and fvdi 2 all are online version.
They always were blocked anytime by STIC company zhu engineer.
Col19 (14th January, 2021)
FVDI 2015, 2016, 2018, 2019 ,FVDI 2 and all version SVCI with a battery
When the battery dies, the device will be locked
When the battery dies, the device will be locked.jpg
Col19 (14th January, 2021)
teerak2uk (14th January, 2021)
Hi friends Thanks Exxl for the answer but it doesn't really answer the question.
If I solder a new battery to the back of the PCB in parallel (without removing the current battery) is there any way to keep it ?
Example: the current battery gives 3.25V, i solder a second battery with a switch on the back of the PCB, when the first drains (2.8V or less) i activate the mini switch to turn on the second battery soldered to the 'rear and replace the first with another battery with switch, when the voltage of the second battery drops to 2.8V or less i activate the first which will have 3.3V and so on ...
in this way it would be possible to keep it for a long time ?
Thanks for your advices. I saw some mini CR2032 battery slot with switch and two long threads (+ and -) to be soldered on Alie,
I will share the links if you confirm this method could have worked.
Thank you.
FVDI 2015, 2016, 2018, 2019 ,FVDI 2 and all version SVCI were blocked three ways:
1. STIC zhu engineer can block your tool by Server
2. STIC zhu engineer can block your tool by update
3. When the battery dies, the device will be locked
Help me for this problem svci 2020
https://www.facebook.com/groups/1844...06432682827165
Will SVCI 2019 interface work with 2018 software?
I hawe 2019 software but special functions doesent work properly. I taught tat will work with 2018 software. I hawe all softwares from 2014 to 2020
Special functions in last version of software doesn't work in SVCI 2019 or 2020. Read the STIC site. You can use previous versions. You CAN'T run SVCI 2018 software on SVCI 2019 or 2020.
carradio2001 (24th January, 2021)
SVCI 2019 (black case), I shorted the internal battery. Nothing bad happened !
Carradio2001.
cristo_844 (27th January, 2021)
I have fvdi 2014 with immoplus 13.6, has somebody tried newer version 19.2 ?
OK, not working.
Last edited by Domi; 27th January, 2021 at 09:49 AM.
Keep in mind, English is not my native language.
Bookmarks