Is there a problem with Mb server? trying to do data acquisition for a W207, with and without the power adapter, but after 30 seconds, it says fail, i tried yesterday and today, same message, even with power adapter, it says 4 hours, any ideas?
Is there a problem with Mb server? trying to do data acquisition for a W207, with and without the power adapter, but after 30 seconds, it says fail, i tried yesterday and today, same message, even with power adapter, it says 4 hours, any ideas?
Data acquisition is collection data from ignition, nothing with server feedback.
after you collect dalla data- send data to server for result
nazz2 (8th December, 2023)
So what's the problem? I tried different port,USB lead ,now when I insert,remove If key,it times out, I tried another Eis,same result, it reads the Eis,Esl, but when chosing lost key, data acquisition,it times out. Noticed the key has been blocked, but since I am doing lost key,well, can these be read by soldering wires to Eis? Not in the vvdi prog menu.
Thats the conclution i am getting Babeh, but i have 2 rigs set up, and both giving same results, different cable set.
EDIT. guys this one sorted, it turned out to be a faulty IR reader
Last edited by nazz2; 12th December, 2023 at 04:09 PM.
HI
Any idea how to read this W246 EZS with one connector on bench. Tried with this cable without suc6. cable has this pin connection. see pic.
Anyone can check if this FBS3 or 4 pls
WDD1760421J010192
Bench cable dismantled and tested . Seem no +12 cable was available. Made one and all ok.
W246MG.jpg
W246AG.jpg
Here are 2 type of w246 connections
Hi
I ve some issue with EZS from W230 which not working properly. Original EZS is HC12. I ve one EZS W230 ST12 and tried to virginse and personalise.
Car start but i ve a lot of errors ABS ESP and zo on.
My question are deze compatible with each other or not?
I think SSID is the problem.
Hi
Is this FBS3 or 4
WDD1760421J300607
Bookmarks