Hi
Can i have erase password please.
Thanks
DJ
erase pass.jpg
Hi
Can i have erase password please.
Thanks
DJ
erase pass.jpg
Neither Xhorse nor CG keys will work for older non-BGA cars before 2009.
You need original for those.
Weasel3 (9th June, 2021)
Today for the first time I made a key with keyless go on W221 2009.
Used the key *Xhorse VVDI BE Universal Benz FBS3 KeylessGo Smart key*
I have programmed the key, but the keyless function does not work, error: The key is not recognized. At the same time, only keyless does not work (by inserting the key into the ignition lock, the car starts, the doors close/open if you press the buttons). Do I understand correctly that dear * xhorse Jay* and * autoTkey* described this situation? That is, in this car, I must use the original key with two batteries in order for the keyless function to work. And the VVDI keyless key will not work in this car (the keyless function will not work)?
EIS.jpg
Hi
I have a w212 eis (without elv)
It wont renew. I think i have renewed same partnumber before.
but i load all data and tryed to renew by ir. but it stops at 90% every time.
Any ideas ?
Last edited by MBSERVICENORWAY; 21st June, 2021 at 02:22 PM.
HI,
Your erase password is wrong if I'm correct ...
CarCity (22nd June, 2021), MBSERVICENORWAY (21st June, 2021)
Thanks will try that erase password. I also sent you a pm
sir,this EIS is original? i first see this problem too, can you send me your log 、 device SN and car information to my mail:neutrinohu@foxmail.com ,i collect to certain problem avoid latter same accident. thank you.
CarCity (22nd June, 2021), MBSERVICENORWAY (22nd June, 2021)
hi i sent you a pm
Bookmarks